EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Digital Manufacturing of Functional Ready‐to‐Use Microfluidic Systems

Vahid Karamzadeh iD, Ahmad Sohrabi-Kashani iD, Molly Shen iD, David Juncker iD

Advanced Materials · 2023-11 · 35 (47)

DOI: 10.1002/adma.202303867 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 12.10.2023. Verfasst von Vahid Karamzadeh und 3 weiteren Autor:innen. Beteiligte Einrichtung: Biomedical Engineering Department, McGill University, Montreal, QC, H3A 0G1, Canada. Die Arbeit wurde bisher 34-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: FRQNT for the doctoral scholarship, Canada Research Chair in Bioengineering, FRQNT Postdoctoral Fellowship.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Digital manufacturing (DM) holds great potential for microfluidics, but requirements for embedded conduits and high resolution beyond the capability of common manufacturing equipment, and microfluidic systems' dependence on peripheralshave limited its adoption. Capillaric circuits (CCs) are structurally encoded, self‐contained microfluidic systems that operate and self‐fill via precisely tailored hydrophilicity. CCs are heretofore hydrophilized in a plasma chamber, but which offers only transient hydrophilicity, lacks reproducibility, and limits CC design to open surface channels subsequently sealed with tape. Here, the additive DM of monolithic, fully functional, and intrinsically hydrophilic CCs is reported. CCs are 3D printed with commonly available light‐engine‐based 3D printers using poly(ethylene glycol)diacrylate‐based ink co‐polymerized with hydrophilic acrylic acid crosslinkers and optimized for hydrophilicity and printability. A new, robust capillary valve design and embedded conduits with circular cross‐sections that prevent bubble trapping are presented, interwoven circuit architectures created, and CC use illustrated with an immunoassay. Finally, the external paper capillary pumps are eliminated by directly embedding the capillary pump in the chip as a porous gyroid structure, realizing fully functional, monolithic CCs. Thence, a digital file can be made into a CC by commonly available 3D printers in less than 30 min enabling low‐cost, distributed DM of fully functional ready‐to‐use microfluidic systems.

Schlagwörter

Stichwörter der Autor:innen

3D printingcapillaric circuitsdiagnosticsdigital manufacturingfunctional microfluidicshydrophilic ink

Autor:innen und Institutionen

  • Biomedical Engineering Department, McGill University, Montreal, QC, H3A 0G1, Canada.
  • McGill Genome Centre, McGill University, Montreal, H3A 0G1, Canada.

ORCID-Profile: Vahid Karamzadeh, Ahmad Sohrabi-Kashani, Molly Shen, David Juncker

Förderung

  • FRQNT for the doctoral scholarship
  • Canada Research Chair in Bioengineering
  • FRQNT Postdoctoral Fellowship

Zitieren

APA

Karamzadeh, V., Sohrabi-Kashani, A., Shen, M., & Juncker, D. (2023). Digital Manufacturing of Functional Ready‐to‐Use Microfluidic Systems. Advanced Materials, 35(47). https://doi.org/10.1002/adma.202303867

Vancouver

Karamzadeh V, Sohrabi-Kashani A, Shen M, Juncker D. Digital Manufacturing of Functional Ready‐to‐Use Microfluidic Systems. Advanced Materials. 2023;35(47). doi:10.1002/adma.202303867

BibTeX
@article{Karamzadeh2023,
  author = {Karamzadeh, Vahid and Sohrabi-Kashani, Ahmad and Shen, Molly and Juncker, David},
  title = {Digital Manufacturing of Functional Ready‐to‐Use Microfluidic Systems},
  journal = {Advanced Materials},
  year = {2023},
  volume = {35},
  number = {47},
  doi = {10.1002/adma.202303867}
}
Kostenlos starten →