Crystallization Control for Ambient Printed FA‐Based Lead Triiodide Perovskite Solar Cells
Advanced Materials · 2023-12 · 35 (51)
DOI: 10.1002/adma.202303384 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 08.11.2023. Verfasst von Lei Yin und 15 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Applied Surface and Colloid Chemistry, Ministry of Education, Shaanxi Key Laboratory for Advanced Energy Devices, Shaanxi Engineeri…. Die Arbeit wurde bisher 47-mal zitiert (Crossref) und nennt 54 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities, National 1000 Talents Plan program.
Abstract (Originalsprache)
Upscalable printing of high‐performance and stable perovskite solar cells (PSCs) is highly desired for commercialization. However, the efficiencies of printed PSCs lag behind those of their lab‐scale spin‐coated counterparts owing to the lack of systematic understanding and control over perovskite crystallization dynamics. Here, the controlled crystallization dynamics achieved using an additive 1‐butylpyridine tetrafluoroborate (BPyBF 4 ) for high‐quality ambient printed α‐formamidinium lead triiodide (FAPbI 3 ) perovskite films are reported. Using in situ grazing‐incidence wide‐angle X‐ray scattering and optical diagnostics, the spontaneous formation of α‐FAPbI 3 from precursors during printing without the involvement of δ‐FAPbI 3 is demonstrated. The addition of BPyBF 4 delays the crystallization onset of α‐FAPbI 3 , enhances the conversion from sol‐gel to perovskite, and reduces stacking defects during printing. Therefore, the altered crystallization results in fewer voids, larger grains, and less trap‐induced recombination loss within printed films. The printed PSCs yield high power conversion efficiencies of 23.50% and 21.60% for a 0.09 cm –2 area device and a 5 cm × 5 cm‐area module, respectively. Improved device stability is further demonstrated, i.e., approximately 94% of the initial efficiency is retained for over 2400 h under ambient conditions without encapsulation. This study provides an effective crystallization control method for the ambient printing manufacture of large‐area high‐performance PSCs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Applied Surface and Colloid Chemistry, Ministry of Education, Shaanxi Key Laboratory for Advanced Energy Devices, Shaanxi Engineering Lab for Advanced Energy Technology, Institute for Advanced Energy M…
- State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, 430070, China.
- School of Microelectronics, Fudan University, Shanghai, 200433, China.
ORCID-Profile: Kui Zhao
Förderung
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
- National 1000 Talents Plan program
Zitieren
APA
Yin, L., Huang, W., Fang, J., Ding, Z., Jin, C., Du, Y., Lang, L., Yang, T., Wang, S., Cai, W., Liu, C., Zhao, G., Yang, Y., Liu, S. F., Bu, T., & Zhao, K. (2023). Crystallization Control for Ambient Printed FA‐Based Lead Triiodide Perovskite Solar Cells. Advanced Materials, 35(51). https://doi.org/10.1002/adma.202303384
Vancouver
Yin L, Huang W, Fang J, Ding Z, Jin C, Du Y, et al. Crystallization Control for Ambient Printed FA‐Based Lead Triiodide Perovskite Solar Cells. Advanced Materials. 2023;35(51). doi:10.1002/adma.202303384
BibTeX
@article{Yin2023,
author = {Yin, Lei and Huang, Wenliang and Fang, Junjie and Ding, Zicheng and Jin, Chengkai and Du, Yachao and Lang, Lei and Yang, Tinghuan and Wang, Shumei and Cai, Weilun and Liu, Chou and Zhao, Guangtao and Yang, Yingguo and Liu, Shengzhong Frank and Bu, Tongle and Zhao, Kui},
title = {Crystallization Control for Ambient Printed FA‐Based Lead Triiodide Perovskite Solar Cells},
journal = {Advanced Materials},
year = {2023},
volume = {35},
number = {51},
doi = {10.1002/adma.202303384}
}
EUVIMED