EUVIMEDEUVIMED entdecken
Crossref

Mechanochromism and Strain‐Induced Crystallization in Thiol‐yne‐Derived Stereoelastomers

Virginia C Ritter, Samantha M McDonald, Andrey V Dobrynin, Stephen L Craig, Matthew L Becker iD

Advanced Materials · 2023-10 · 35 (41)

DOI: 10.1002/adma.202302163 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 29.08.2023. Verfasst von Virginia C Ritter und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, Duke University, Durham, NC, 27708, USA. Die Arbeit wurde bisher 41-mal zitiert (Crossref) und nennt 48 Literaturangaben. Gefördert von: Army Research Office, University of Akron under Air Force Subaward Trust in Flexible Electronics, National Science Foundation aiM NRT Program at Duke University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Most elastomers undergo strain‐induced crystallization (SIC) under tension; as individual chains are held rigidly in a fixed position by an applied strain, their alignment along the strain field results in a shift from strain‐hardening (SH) to SIC. A similar degree of stretching is associated with the tension necessary to accelerate mechanically coupled, covalent chemical responses of mechanophores in overstretched chains, raising the possibility of an interplay between the macroscopic response of SIC and the molecular response of mechanophore activation. Here, thiol‐yne‐derived stereoelastomers doped covalently with a dipropiolate‐derivatized spiropyran (SP) mechanophore (0.25–0.38 mol%) are reported. The material properties of SP‐containing films are consistent with undoped controls, indicating that the SP is a reporter of the mechanical state of the polymer. Uniaxial tensile tests reveal correlations between mechanochromism and SIC, which are strain‐rate‐dependent. When mechanochromic films are stretched slowly to the point of mechanophore activation, the covalently tethered mechanophore remains trapped in a force‐activated state, even after the applied stress is removed. Mechanophore reversion kinetics correlate with the applied strain rate, resulting in highly tunable decoloration rates. Because these polymers are not covalently crosslinked, they are recyclable by melt‐pressing into new films, increasing their potential range of strain‐sensing, morphology‐sensing, and shape‐memory applications.

Schlagwörter

Stichwörter der Autor:innen

mechanochromismspiropyranstereoelastomersstrain-induced crystallization

Autor:innen und Institutionen

  • Department of Chemistry, Duke University, Durham, NC, 27708, USA.
  • Department of Chemistry, University of North Carolina, Chapel Hill, NC, 27514, USA.
  • Thomas Lord Department of Mechanical Engineering and Materials Science, Duke University, Durham, NC, 27708, USA.

ORCID-Profile: Matthew L Becker

Förderung

  • Army Research Office
  • University of Akron under Air Force Subaward Trust in Flexible Electronics
  • National Science Foundation aiM NRT Program at Duke University
  • Duke University Shared Materials Instrumentation Facility
  • North Carolina Research Triangle Nanotechnology Network
  • National Science Foundation
  • National Nanotechnology Coordinated Infrastructure
  • Duke Mass Spectroscopy Center

Zitieren

APA

Ritter, V. C., McDonald, S. M., Dobrynin, A. V., Craig, S. L., & Becker, M. L. (2023). Mechanochromism and Strain‐Induced Crystallization in Thiol‐yne‐Derived Stereoelastomers. Advanced Materials, 35(41). https://doi.org/10.1002/adma.202302163

Vancouver

Ritter VC, McDonald SM, Dobrynin AV, Craig SL, Becker ML. Mechanochromism and Strain‐Induced Crystallization in Thiol‐yne‐Derived Stereoelastomers. Advanced Materials. 2023;35(41). doi:10.1002/adma.202302163

BibTeX
@article{Ritter2023,
  author = {Ritter, Virginia C and McDonald, Samantha M and Dobrynin, Andrey V and Craig, Stephen L and Becker, Matthew L},
  title = {Mechanochromism and Strain‐Induced Crystallization in Thiol‐yne‐Derived Stereoelastomers},
  journal = {Advanced Materials},
  year = {2023},
  volume = {35},
  number = {41},
  doi = {10.1002/adma.202302163}
}
Kostenlos starten →