Outstanding Fill Factor in Inverted Organic Solar Cells with SnO 2 by Atomic Layer Deposition
Advanced Materials · 2024-05 · 36 (20)
DOI: 10.1002/adma.202301404 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 21.04.2023. Verfasst von Lorenzo Di Mario und 7 weiteren Autor:innen. Beteiligte Einrichtung: Photophysics and OptoElectronics, Zernike Institute for Advanced Materials, University of Groningen, Nijenborgh 4, Groningen, 9747 AG, The Netherland…. Die Arbeit wurde bisher 56-mal zitiert (Crossref) und nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: SOLAR-ERA.NET, Foundation for Fundamental Research on Matter, NWO organization.
Abstract (Originalsprache)
Transport layers are of outmost importance for thin‐film solar cells, determining not only their efficiency but also their stability. To bring one of these thin‐film technologies toward mass production, many factors besides efficiency and stability become important, including the ease of deposition in a scalable manner and the cost of the different material's layers. Herein, highly efficient organic solar cells (OSCs), in the inverted structure (n‐i‐p), are demonstrated by using as electron transport layer (ETL) tin oxide (SnO 2 ) deposited by atomic layer deposition (ALD). ALD is an industrial grade technique which can be applied at the wafer level and also in a roll‐to‐roll configuration. A champion power conversion efficiency (PCE) of 17.26% and a record fill factor (FF) of 79% are shown by PM6:L8‐BO OSCs when using ALD‐SnO 2 as ETL. These devices outperform solar cells with SnO 2 nanoparticles casted from solution (PCE 16.03%, FF 74%) and also those utilizing the more common sol–gel ZnO (PCE 16.84%, FF 77%). The outstanding results are attributed to a reduced charge carrier recombination at the interface between the ALD‐SnO 2 film and the active layer. Furthermore, a higher stability under illumination is demonstrated for the devices with ALD‐SnO 2 in comparison with those utilizing ZnO.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Photophysics and OptoElectronics, Zernike Institute for Advanced Materials, University of Groningen, Nijenborgh 4, Groningen, 9747 AG, The Netherlands.
- Physical Chemistry of Polymeric and Nanostructured Materials, Zernike Institute for Advanced Materials, University of Groningen, Nijenborgh 4, Groningen, 9747 AG, The Netherlands.
ORCID-Profile: Lorenzo Di Mario, David Garcia Romero, Eelco K Tekelenburg, Teodor Zaharia, Giuseppe Portale, Maria A Loi
Förderung
- SOLAR-ERA.NET
- Foundation for Fundamental Research on Matter
- NWO organization
- Stichting voor Fundamenteel Onderzoek der Materie
Zitieren
APA
Di Mario, L., Garcia Romero, D., Wang, H., Tekelenburg, E. K., Meems, S., Zaharia, T., Portale, G., & Loi, M. A. (2024). Outstanding Fill Factor in Inverted Organic Solar Cells with SnO 2 by Atomic Layer Deposition. Advanced Materials, 36(20). https://doi.org/10.1002/adma.202301404
Vancouver
Di Mario L, Garcia Romero D, Wang H, Tekelenburg EK, Meems S, Zaharia T, et al. Outstanding Fill Factor in Inverted Organic Solar Cells with SnO 2 by Atomic Layer Deposition. Advanced Materials. 2024;36(20). doi:10.1002/adma.202301404
BibTeX
@article{DiMario2024,
author = {Di Mario, Lorenzo and Garcia Romero, David and Wang, Han and Tekelenburg, Eelco K and Meems, Sander and Zaharia, Teodor and Portale, Giuseppe and Loi, Maria A},
title = {Outstanding Fill Factor in Inverted Organic Solar Cells with SnO 2 by Atomic Layer Deposition},
journal = {Advanced Materials},
year = {2024},
volume = {36},
number = {20},
doi = {10.1002/adma.202301404}
}
EUVIMED