(111)‐Dominated Perovskite Films by Antisolvent Engineering
Advanced Materials · 2023-07 · 35 (28)
DOI: 10.1002/adma.202301115 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 24.05.2023. Verfasst von Xiangyu Sun und 8 weiteren Autor:innen. Beteiligte Einrichtung: Beijing Key Laboratory of Construction-Tailorable Advanced Functional Materials and Green Applications, Experimental Center of Advanced Materials, Sc…. Hauptthemen laut MEDLINE: Calcium Compounds, Oxides. Die Arbeit wurde bisher 81-mal zitiert (Crossref) und nennt 52 Literaturangaben. Gefördert von: DOE Office of Science User Facility, National Natural Science Foundation of China.
Abstract (Originalsprache)
Fabricating perovskite films with a dominant crystal orientation is an effective path to realizing quasi‐single‐crystal perovskite film, which can eliminate the fluctuation of the electrical properties in films arising from grain‐to‐grain variations, and improve the performance of perovskite solar cells (PSCs). Perovskite (FAPbI 3 ) films based on one‐step antisolvent methods usually suffer from chaotic orientations due to the inevitable intermediate phase conversion from intermediates of PbI 2 •DMSO, FA 2 Pb 3 I 8 •4DMSO, and δ ‐FAPbI 3 to α ‐FAPbI 3 . Here, a high‐quality perovskite film with (111) preferred orientation ((111)‐ α ‐FAPbI 3 ) using a short‐chain isomeric alcohol antisolvent, isopropanol (IPA) or isobutanol (IBA), is reported. The interaction between IPA and PbI 2 leads to a corner‐sharing structure instead of an edge‐sharing PbI 2 octahedron, sidestepping the formation of these intermediates. With the volatilization of IPA, FA + can replace IPA in situ to form α ‐FAPbI 3 along the (111) direction. Compared to randomly orientated perovskites, the dominantly (111) orientated perovskite ((111)‐perovskite) exhibits improved carrier mobility, uniform surface potential, suppressed film defects and enhanced photostability. PSCs based on the (111)‐perovskite films show 22% power conversion efficiency and excellent stability, which remains unchanged after 600 h continuous working at maximum power point, and 95% after 2000 h of storage in atmosphere environment.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Beijing Key Laboratory of Construction-Tailorable Advanced Functional Materials and Green Applications, Experimental Center of Advanced Materials, School of Materials Science and Engineering, Beijing Institute of Techno…
- School of Microelectronics, University of Science and Technology of China, Hefei, Anhui, 230026, China.
- Polymer Science and Engineering Department, University of Massachusetts Amherst, Amherst, MA, 01003, USA.
- Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, CA, 94720, USA.
- Advanced Institute for Materials Research (AIMR), Tohoku University, 2-1-1 Katahira, Aoba, Sendai, 980-8577, Japan.
ORCID-Profile: Xiangyu Sun, Fangze Liu, Jing Wei, Hongbo Li
Förderung
- DOE Office of Science User Facility
- National Natural Science Foundation of China
Zitieren
APA
Sun, X., Li, D., Zhao, L., Zhang, Y., Hu, Q., Russell, T. P., Liu, F., Wei, J., & Li, H. (2023). (111)‐Dominated Perovskite Films by Antisolvent Engineering. Advanced Materials, 35(28). https://doi.org/10.1002/adma.202301115
Vancouver
Sun X, Li D, Zhao L, Zhang Y, Hu Q, Russell TP, et al. (111)‐Dominated Perovskite Films by Antisolvent Engineering. Advanced Materials. 2023;35(28). doi:10.1002/adma.202301115
BibTeX
@article{Sun2023,
author = {Sun, Xiangyu and Li, Dongni and Zhao, Lu and Zhang, Yao and Hu, Qin and Russell, Thomas P and Liu, Fangze and Wei, Jing and Li, Hongbo},
title = {(111)‐Dominated Perovskite Films by Antisolvent Engineering},
journal = {Advanced Materials},
year = {2023},
volume = {35},
number = {28},
doi = {10.1002/adma.202301115}
}
EUVIMED