Imitating Architectural Mortise‐Tenon Structure for Stable Ni‐Rich Layered Cathodes
Advanced Materials · 2023-08 · 35 (32)
DOI: 10.1002/adma.202301096 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 30.06.2023. Verfasst von Xinghua Tan und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Advanced Materials, Peking University, Shenzhen Graduate School, Shenzhen, 518055, China. Die Arbeit wurde bisher 80-mal zitiert (Crossref) und nennt 50 Literaturangaben. Gefördert von: China Postdoctoral Science Foundation, National Natural Science Foundation of China, Strategic Priority Research Program of the Chinese Academy of Sciences.
Abstract (Originalsprache)
Ni‐rich layered oxides are the most promising cathodes for Li‐ion batteries, but chemo‐mechanical failures during cycling and large first‐cycle capacity loss hinder their applications in high‐energy batteries. Herein, by introducing spinel‐like mortise‐tenon structures into the layered phase of LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811), the adverse volume variations in cathode materials can be significantly suppressed. Meanwhile, these mortise‐tenon structures play the role of the expressway for fast lithium‐ion transport, which is substantiated by experiments and calculations. Moreover, the particles with mortise‐tenon structures usually terminate with the most stable (003) facet. The new cathode exhibits a discharge capacity of 215 mAh g −1 at 0.1 C with an initial Coulombic efficiency of 97.5%, and capacity retention of 82.2% after 1200 cycles at 1 C. This work offers a viable lattice engineering to address the stability and low initial Coulombic efficiency of the Ni‐rich layered oxides, and facilitates the implementation of Li‐ion batteries with high‐energy density and long durability.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Advanced Materials, Peking University, Shenzhen Graduate School, Shenzhen, 518055, China.
- Nanofabrication Laboratory, CAS Key Laboratory for Nanophotonic Materials and Devices, National Center for Nanoscience and Technology, Beijing, 100190, China.
- Chemical Sciences and Engineering Division, Argonne National Laboratory, Lemont, IL, 60439, USA.
- The Institute of Technological Sciences, MOE Key Laboratory of Hydrodynamic Transients, Wuhan University, Wuhan, 430072, China.
ORCID-Profile: Kang Liu, Peihua Yang, Feng Pan
Förderung
- China Postdoctoral Science Foundation
- National Natural Science Foundation of China
- Strategic Priority Research Program of the Chinese Academy of Sciences
- Soft Science Research Project of Guangdong Province
- Shenzhen Science and Technology Research
- Basic, Applied Basic Research Foundation of Guangdong Province
- US-China Clean Energy Research Centre
- Vehicle Technologies Office
Zitieren
APA
Tan, X., Chen, Z., Liu, T., Zhang, Y., Zhang, M., Li, S., Chu, W., Liu, K., Yang, P., & Pan, F. (2023). Imitating Architectural Mortise‐Tenon Structure for Stable Ni‐Rich Layered Cathodes. Advanced Materials, 35(32). https://doi.org/10.1002/adma.202301096
Vancouver
Tan X, Chen Z, Liu T, Zhang Y, Zhang M, Li S, et al. Imitating Architectural Mortise‐Tenon Structure for Stable Ni‐Rich Layered Cathodes. Advanced Materials. 2023;35(32). doi:10.1002/adma.202301096
BibTeX
@article{Tan2023,
author = {Tan, Xinghua and Chen, Zhefeng and Liu, Tongchao and Zhang, Yongxin and Zhang, Mingjian and Li, Shunning and Chu, Weiguo and Liu, Kang and Yang, Peihua and Pan, Feng},
title = {Imitating Architectural Mortise‐Tenon Structure for Stable Ni‐Rich Layered Cathodes},
journal = {Advanced Materials},
year = {2023},
volume = {35},
number = {32},
doi = {10.1002/adma.202301096}
}
EUVIMED