A Bifunctional Carbazide Additive For Durable CsSnI 3 Perovskite Solar Cells
Advanced Materials · 2023-06 · 35 (26)
DOI: 10.1002/adma.202300503 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 07.05.2023. Verfasst von Chenghao Duan und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Environment and Energy, State Key Laboratory of Luminescent Materials and Devices, Guangdong Provincial Key Laboratory of Solid Wastes Poll…. Die Arbeit wurde bisher 96-mal zitiert (Crossref) und nennt 55 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Guangdong Science and Technology Program, International Training Program for Young Talents of Guangdong Province.
Abstract (Originalsprache)
Inorganic CsSnI 3 with low toxicity and a narrow bandgap is a promising photovoltaic material. However, the performance of CsSnI 3 perovskite solar cells (PSCs) is much lower than that of Pb‐based and hybrid Sn‐based (e.g., CsPbX 3 and CH(NH 2 ) 2 SnX 3 ) PSCs, which may be attributed to its poor film‐forming property and the deep traps induced by Sn 4+ . Here, a bifunctional additive carbazide (CBZ) is adapted to deposit a pinhole‐free film and remove the deep traps via two‐step annealing. The lone electrons of the NH 2 and CO units in CBZ can coordinate with Sn 2+ to form a dense film with large grains during the phase transition at 80 °C. The decomposition of CBZ can reduce Sn 4+ to Sn 2+ during annealing at 150 °C to remove the deep traps. Compared with the control device (4.12%), the maximum efficiency of the CsSnI 3 :CBZ PSC reaches 11.21%, which is the highest efficiency of CsSnI 3 PSC reported to date. A certified efficiency of 10.90% is obtained by an independent photovoltaic testing laboratory. In addition, the unsealed CsSnI 3 :CBZ devices maintain initial efficiencies of ≈100%, 90%, and 80% under an inert atmosphere (60 days), standard maximum power point tracking (650 h at 65 °C), and ambient air (100 h), respectively.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Environment and Energy, State Key Laboratory of Luminescent Materials and Devices, Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling, South China University of Technology, Gua…
- Department of Physics, The Chinese University of Hong Kong, Hong Kong, 999077, P. R. China.
- Center of Excellence in Nanoscience (CAS), Key Laboratory of Nanosystem and Hierarchical Fabrication (CAS), National Center for Nanoscience and Technology, Beijing, 100190, P. R. China.
ORCID-Profile: Keyou Yan
Förderung
- National Natural Science Foundation of China
- Guangdong Science and Technology Program
- International Training Program for Young Talents of Guangdong Province
- National Key Research and Development Program of China
- National Basic Research Program of China
Zitieren
APA
Duan, C., Zou, F., Wen, Q., Qin, M., Li, J., Chen, C., Lu, X., Ding, L., & Yan, K. (2023). A Bifunctional Carbazide Additive For Durable CsSnI 3 Perovskite Solar Cells. Advanced Materials, 35(26). https://doi.org/10.1002/adma.202300503
Vancouver
Duan C, Zou F, Wen Q, Qin M, Li J, Chen C, et al. A Bifunctional Carbazide Additive For Durable CsSnI 3 Perovskite Solar Cells. Advanced Materials. 2023;35(26). doi:10.1002/adma.202300503
BibTeX
@article{Duan2023,
author = {Duan, Chenghao and Zou, Feilin and Wen, Qiaoyun and Qin, Minchao and Li, Jiong and Chen, Chang and Lu, Xinhui and Ding, Liming and Yan, Keyou},
title = {A Bifunctional Carbazide Additive For Durable CsSnI 3 Perovskite Solar Cells},
journal = {Advanced Materials},
year = {2023},
volume = {35},
number = {26},
doi = {10.1002/adma.202300503}
}
EUVIMED