Poly(dimethylsiloxane)‐ block ‐PM6 Polymer Donors for High‐Performance and Mechanically Robust Polymer Solar Cells
Advanced Materials · 2023-06 · 35 (24)
DOI: 10.1002/adma.202300230 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 27.04.2023. Verfasst von Soodeok Seo und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, 34141, Republic of Korea. Die Arbeit wurde bisher 98-mal zitiert (Crossref) und nennt 74 Literaturangaben. Gefördert von: National Research Foundation of Korea.
Abstract (Originalsprache)
High power conversion efficiency (PCE) and stretchability are the dual requirements for the wearable application of polymer solar cells (PSCs). However, most efficient photoactive films are mechanically brittle. In this work, highly efficient (PCE = 18%) and mechanically robust (crack‐onset strain (COS) = 18%) PSCs are acheived by designing block copolymer (BCP) donors, PM6‐ b ‐PDMS x ( x = 5k, 12k, and 19k). In these BCP donors, stretchable poly(dimethylsiloxane) (PDMS) blocks are covalently linked with the PM6 blocks to effectively increase the stretchability. The stretchability of the BCP donors increases with a longer PDMS block, and PM6‐ b ‐PDMS 19k :L8‐BO PSC exhibits a high PCE (18%) and 9‐times higher COS value (18%) compared to that (COS = 2%) of the PM6:L8‐BO‐based PSC. However, the PM6:L8‐BO:PDMS 12k ternary blend shows inferior PCE (5%) and COS (1%) due to the macrophase separation between PDMS and active components. In the intrinsically stretchable PSC, the PM6‐ b ‐PDMS 19k :L8‐BO blend exhibits significantly greater mechanical stability PCE 80% ((80% of the initial PCE) at 36% strain) than those of the PM6:L8‐BO blend (PCE 80% at 12% strain) and the PM6:L8‐BO:PDMS ternary blend (PCE 80% at 4% strain). This study suggests an effective design strategy of BCP P D to achieve stretchable and efficient PSCs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, 34141, Republic of Korea.
- Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST), Daejeon, 34141, Republic of Korea.
- Department of Physics and EHSRC, University of Ulsan, Ulsan, 44610, Republic of Korea.
ORCID-Profile: Jinseok Park, Bumjoon J Kim
Förderung
- National Research Foundation of Korea
Zitieren
APA
Seo, S., Lee, J. W., Kim, D. J., Lee, D., Phan, T. N., Park, J., Tan, Z., Cho, S., Kim, T. S., & Kim, B. J. (2023). Poly(dimethylsiloxane)‐ block ‐PM6 Polymer Donors for High‐Performance and Mechanically Robust Polymer Solar Cells. Advanced Materials, 35(24). https://doi.org/10.1002/adma.202300230
Vancouver
Seo S, Lee JW, Kim DJ, Lee D, Phan TN, Park J, et al. Poly(dimethylsiloxane)‐ block ‐PM6 Polymer Donors for High‐Performance and Mechanically Robust Polymer Solar Cells. Advanced Materials. 2023;35(24). doi:10.1002/adma.202300230
BibTeX
@article{Seo2023,
author = {Seo, Soodeok and Lee, Jin-Woo and Kim, Dong Jun and Lee, Dongchan and Phan, Tan Ngoc-Lan and Park, Jinseok and Tan, Zhengping and Cho, Shinuk and Kim, Taek-Soo and Kim, Bumjoon J},
title = {Poly(dimethylsiloxane)‐ block ‐PM6 Polymer Donors for High‐Performance and Mechanically Robust Polymer Solar Cells},
journal = {Advanced Materials},
year = {2023},
volume = {35},
number = {24},
doi = {10.1002/adma.202300230}
}
EUVIMED