Ultrahigh‐Voltage LiCoO 2 at 4.7 V by Interface Stabilization and Band Structure Modification
Advanced Materials · 2023-06 · 35 (22)
DOI: 10.1002/adma.202212059 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 14.04.2023. Verfasst von Zhaofeng Zhuang und 11 weiteren Autor:innen. Beteiligte Einrichtung: Tsinghua-Berkeley Shenzhen Institute & Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, 518055, China. Die Arbeit wurde bisher 224-mal zitiert (Crossref) und nennt 59 Literaturangaben. Gefördert von: National Key Research and Development Program of China, Joint Funds of the National Natural Science Foundation of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
Lithium cobalt oxide (LCO) is widely used in Li‐ion batteries due to its high volumetric energy density, which is generally charged to 4.3 V. Lifting the cut‐off voltage of LCO from 4.3 V to 4.7 V will increase the specific capacity from 150 to 230 mAh g ‐1 with a significant improvement of 53%. However, LCO suffers serious problems of H1‐3/O1 phase transformation, unstable interface between cathode and electrolyte, and irreversible oxygen redox reaction at 4.7 V. Herein, interface stabilization and band structure modification are proposed to strengthen the crystal structure of LCO for stable cycling of LCO at an ultrahigh voltage of 4.7 V. Gradient distribution of magnesium and uniform doping of nickel in Li layers inhibit the harmful phase transitions of LCO, while uniform LiMg x Ni 1− x PO 4 coating stabilizes the LCO‐electrolyte interface during cycles. Moreover, the modified band structure improves the oxygen redox reaction reversibility and electrochemical performance of the modified LCO. As a result, the modified LCO has a high capacity retention of 78% after 200 cycles at 4.7 V in the half cell and 63% after 500 cycles at 4.6 V in the full cell. This work makes the capacity of LCO one step closer to its theoretical specific capacity.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Tsinghua-Berkeley Shenzhen Institute & Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, 518055, China.
- Faculty of Materials Science and Energy Engineering/Institute of Technology for Carbon Neutrality, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, 518055, China.
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, 110016, China.
ORCID-Profile: Zhaofeng Zhuang, Guangmin Zhou
Förderung
- National Key Research and Development Program of China
- Joint Funds of the National Natural Science Foundation of China
- National Natural Science Foundation of China
- Shenzhen Science and Technology Program
- Guangdong Innovative and Entrepreneurial Research Team Program
- Start-up Fund, and the Interdisciplinary Research and Innovation Fund of Tsinghua Shenzhen International Graduate School
Zitieren
APA
Zhuang, Z., Wang, J., Jia, K., Ji, G., Ma, J., Han, Z., Piao, Z., Gao, R., Ji, H., Zhong, X., Zhou, G., & Cheng, H. M. (2023). Ultrahigh‐Voltage LiCoO 2 at 4.7 V by Interface Stabilization and Band Structure Modification. Advanced Materials, 35(22). https://doi.org/10.1002/adma.202212059
Vancouver
Zhuang Z, Wang J, Jia K, Ji G, Ma J, Han Z, et al. Ultrahigh‐Voltage LiCoO 2 at 4.7 V by Interface Stabilization and Band Structure Modification. Advanced Materials. 2023;35(22). doi:10.1002/adma.202212059
BibTeX
@article{Zhuang2023,
author = {Zhuang, Zhaofeng and Wang, Junxiong and Jia, Kai and Ji, Guanjun and Ma, Jun and Han, Zhiyuan and Piao, Zhihong and Gao, Runhua and Ji, Haocheng and Zhong, Xiongwei and Zhou, Guangmin and Cheng, Hui-Ming},
title = {Ultrahigh‐Voltage LiCoO 2 at 4.7 V by Interface Stabilization and Band Structure Modification},
journal = {Advanced Materials},
year = {2023},
volume = {35},
number = {22},
doi = {10.1002/adma.202212059}
}
EUVIMED