Diagnosing and Correcting the Failure of the Solid‐State Polymer Electrolyte for Enhancing Solid‐State Lithium–Sulfur Batteries
Advanced Materials · 2023-06 · 35 (22)
DOI: 10.1002/adma.202212039 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 07.04.2023. Verfasst von Xiangyu Meng und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Lab of Fine Chemicals, Liaoning Key Lab for Energy Materials and Chemical Engineering, School of Chemical Engineering, Dalian University of…. Die Arbeit wurde bisher 94-mal zitiert (Crossref) und nennt 52 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Solid‐state polymer electrolytes (SPEs) attract great interest in developing high‐performance yet reliable solid‐state batteries. However, understanding of the failure mechanism of the SPE and SPE‐based solid‐state batteries remains in its infancy, posing a great barrier to practical solid‐state batteries. Herein, the high accumulation and clogging of “dead” lithium polysulfides (LiPS) on the interface between the cathode and SPE with intrinsic diffusion limitation is identified as a critical failure cause of SPE‐based solid‐state Li–S batteries. It induces a poorly reversible chemical environment with retarded kinetics on the cathode–SPE interface and in bulk SPEs, starving the Li–S redox in solid‐state cells. This observation is different from the case in liquid electrolytes with free solvent and charge carriers, where LiPS dissolve but remain alive for electrochemical/chemical redox without interfacial clogging. Electrocatalysis demonstrates the feasibility of tailoring the chemical environment in diffusion‐restricted reaction media for reducing Li–S redox failure in the SPE. It enables Ah‐level solid‐state Li–S pouch cells with a high specific energy of 343 Wh kg −1 on the cell level. This work may shed new light on the understanding of the failure mechanism of SPE for bottom‐up improvement of solid‐state Li–S batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Lab of Fine Chemicals, Liaoning Key Lab for Energy Materials and Chemical Engineering, School of Chemical Engineering, Dalian University of Technology, Dalian, 116024, China.
- State Key Laboratory of Catalysis, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, 116023, China.
- College of Chemical Engineering, Beijing University of Chemical Technology, Beijing, 100029, China.
- Branch of New Material Development, Valiant Co. Ltd. , Yantai, 265503, China.
ORCID-Profile: Zhiyu Wang
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
- Open Project of State Key Laboratory of Organic-Inorganic Composites
Zitieren
APA
Meng, X., Liu, Y., Ma, Y., Boyjoo, Y., Liu, J., Qiu, J., & Wang, Z. (2023). Diagnosing and Correcting the Failure of the Solid‐State Polymer Electrolyte for Enhancing Solid‐State Lithium–Sulfur Batteries. Advanced Materials, 35(22). https://doi.org/10.1002/adma.202212039
Vancouver
Meng X, Liu Y, Ma Y, Boyjoo Y, Liu J, Qiu J, et al. Diagnosing and Correcting the Failure of the Solid‐State Polymer Electrolyte for Enhancing Solid‐State Lithium–Sulfur Batteries. Advanced Materials. 2023;35(22). doi:10.1002/adma.202212039
BibTeX
@article{Meng2023,
author = {Meng, Xiangyu and Liu, Yuzhao and Ma, Yanfu and Boyjoo, Yash and Liu, Jian and Qiu, Jieshan and Wang, Zhiyu},
title = {Diagnosing and Correcting the Failure of the Solid‐State Polymer Electrolyte for Enhancing Solid‐State Lithium–Sulfur Batteries},
journal = {Advanced Materials},
year = {2023},
volume = {35},
number = {22},
doi = {10.1002/adma.202212039}
}
EUVIMED