Te x Se 1– x Photodiode Shortwave Infrared Detection and Imaging
Advanced Materials · 2023-06 · 35 (24)
DOI: 10.1002/adma.202211522 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 28.04.2023. Verfasst von Liuchong Fu und 15 weiteren Autor:innen. Beteiligte Einrichtung: Wuhan National Laboratory for Optoelectronics (WNLO), School of Optical and Electronic Information (SOEI), Huazhong University of Science and Technol…. Die Arbeit wurde bisher 76-mal zitiert (Crossref) und nennt 91 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Hubei Province, Natural Science Foundation, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Short‐wave infrared detectors are increasingly important in the fields of autonomous driving, food safety, disease diagnosis, and scientific research. However, mature short‐wave infrared cameras such as InGaAs have the disadvantage of complex heterogeneous integration with complementary metal–oxide–semiconductor (CMOS) readout circuits, leading to high cost and low imaging resolution. Herein, a low‐cost, high‐performance, and high‐stability Te x Se 1– x short‐wave infrared photodiode detector is reported. The Te x Se 1– x thin film is fabricated through CMOS‐compatible low‐temperature evaporation and post‐annealing process, showcasing the potential of direct integration on the readout circuit. The device demonstrates a broad‐spectrum response of 300–1600 nm, a room‐temperature specific detectivity of 1.0 × 10 10 Jones, a −3 dB bandwidth up to 116 kHz, and a linear dynamic range of over 55 dB, achieving the fastest response among Te‐based photodiode devices and a dark current density 7 orders of magnitude smaller than Te‐based photoconductive and field‐effect transistor devices. With a simple Si 3 N 4 packaging, the detector shows high electric stability and thermal stability, meeting the requirements for vehicular applications. Based on the optimized Te x Se 1– x photodiode detector, the applications in material identification and masking imaging is demonstrated. This work paves a new way for CMOS‐compatible infrared imaging chips.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Wuhan National Laboratory for Optoelectronics (WNLO), School of Optical and Electronic Information (SOEI), Huazhong University of Science and Technology, Wuhan, Hubei, 430074, P. R. China.
- China-EU Institute for Clean and Renewable Energy, Huazhong University of Science and Technology, Wuhan, Hubei, 430074, P. R. China.
- Beijing National Laboratory for Molecular Sciences, Key Laboratory of Molecular Nanotechnology, Institute of Chemistry, Chinese Academy of Sciences, Beijing, 100190, P. R. China.
ORCID-Profile: Chao Chen, Jiang Tang
Förderung
- National Natural Science Foundation of China
- Hubei Province, Natural Science Foundation
- Fundamental Research Funds for the Central Universities
- National Key R&D Program of China
Zitieren
APA
Fu, L., He, Y., Zheng, J., Hu, Y., Xue, J., Li, S., Ge, C., Yang, X., Peng, M., Li, K., Zeng, X., Wei, J., Xue, D. J., Song, H., Chen, C., & Tang, J. (2023). Te x Se 1– x Photodiode Shortwave Infrared Detection and Imaging. Advanced Materials, 35(24). https://doi.org/10.1002/adma.202211522
Vancouver
Fu L, He Y, Zheng J, Hu Y, Xue J, Li S, et al. Te x Se 1– x Photodiode Shortwave Infrared Detection and Imaging. Advanced Materials. 2023;35(24). doi:10.1002/adma.202211522
BibTeX
@article{Fu2023,
author = {Fu, Liuchong and He, Yuming and Zheng, Jiajia and Hu, Yuxuan and Xue, Jiayou and Li, Sen and Ge, Ciyu and Yang, Xuke and Peng, Meng and Li, Kanghua and Zeng, Xiangbin and Wei, Jinchao and Xue, Ding-Jiang and Song, Haisheng and Chen, Chao and Tang, Jiang},
title = {Te x Se 1– x Photodiode Shortwave Infrared Detection and Imaging},
journal = {Advanced Materials},
year = {2023},
volume = {35},
number = {24},
doi = {10.1002/adma.202211522}
}
EUVIMED