3D Printing of Electron/Ion‐Flux Dual‐Gradient Anodes for Dendrite‐Free Zinc Batteries
Advanced Materials · 2023-04 · 35 (17)
DOI: 10.1002/adma.202211498 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 18.03.2023. Verfasst von Hanna He und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute, Sichuan University, Chengdu, 610065, China. Die Arbeit wurde bisher 136-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Natural Science Foundation of China, Sichuan Youth Science and Technology Innovation Research Team Project, Program for Featured Directions of Engineering Multidisciplines of Sichuan University.
Abstract (Originalsprache)
3D porous Zn‐metal anodes have aroused widespread interest for Zn‐ion batteries (ZIBs). Nevertheless, the notorious “top‐growth” dendrites caused by the intrinsic top‐concentrated ions and randomly distributed electrons may ultimately trigger a cell failure. Herein, an electron/ion‐flux dual‐gradient 3D porous Zn anode is reported for dendrite‐free ZIBs by adopting 3D printing technology. The 3D‐printed Zn anode with layer‐by‐layer bottom‐up attenuating Ag nanoparticles (3DP‐BU@Zn) establishes dual‐gradient electron/ion fluxes, i.e., an internal bottom‐up gradient electron flux created by bottom‐rich conductive Ag nanoparticles, and a gradient ion flux resulting from zincophilic Ag nanoparticles which pump ions toward the bottom. Meanwhile, the 3D‐printing‐enabled hierarchical porous structure and continuously conducting network endow unimpeded electron transfer and ion diffusion among the electrode, dominating a bottom‐preferential Zn deposition behavior. As a result, the 3DP‐BU@Zn symmetrical cell affords highly reversible Zn plating/stripping with an extremely small voltage hysteresis of 17.7 mV and a superior lifespan over 630 h at 1 mA cm −2 and 1 mAh cm −2 . Meanwhile, the 3DP‐BU@Zn//VO 2 full cell exhibits remarkable cyclic stability over 500 cycles. This unique dual‐gradient strategy sheds light on the roadmap for the next‐generation safe and durable Zn‐metal batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute, Sichuan University, Chengdu, 610065, China.
- School of Chemical Engineering & Advanced Materials, The University of Adelaide, Adelaide, SA, 5005, Australia.
ORCID-Profile: Zaiping Guo
Förderung
- National Natural Science Foundation of China
- Sichuan Youth Science and Technology Innovation Research Team Project
- Program for Featured Directions of Engineering Multidisciplines of Sichuan University
- Natural Science Foundation of Sichuan Province
Zitieren
APA
He, H., Zeng, L., Luo, D., He, J., Li, X., Guo, Z., & Zhang, C. (2023). 3D Printing of Electron/Ion‐Flux Dual‐Gradient Anodes for Dendrite‐Free Zinc Batteries. Advanced Materials, 35(17). https://doi.org/10.1002/adma.202211498
Vancouver
He H, Zeng L, Luo D, He J, Li X, Guo Z, et al. 3D Printing of Electron/Ion‐Flux Dual‐Gradient Anodes for Dendrite‐Free Zinc Batteries. Advanced Materials. 2023;35(17). doi:10.1002/adma.202211498
BibTeX
@article{He2023,
author = {He, Hanna and Zeng, Li and Luo, Dan and He, Jun and Li, Xiaolong and Guo, Zaiping and Zhang, Chuhong},
title = {3D Printing of Electron/Ion‐Flux Dual‐Gradient Anodes for Dendrite‐Free Zinc Batteries},
journal = {Advanced Materials},
year = {2023},
volume = {35},
number = {17},
doi = {10.1002/adma.202211498}
}
EUVIMED