EUVIMEDEUVIMED entdecken
Crossref

Phosphate‐Rich Interface for a Highly Stable and Safe 4.6 V LiCoO 2 Cathode

Chao Yang, Xiaobin Liao, Xing Zhou, Congli Sun, Rui Qu, Jin Han, Yan Zhao, Liguang Wang iD, Ya You iD, Jun Lu iD

Advanced Materials · 2023-04 · 35 (14)

DOI: 10.1002/adma.202210966 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 23.02.2023. Verfasst von Chao Yang und 9 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, Hubei Province, 430070, P.…. Die Arbeit wurde bisher 77-mal zitiert (Crossref) und nennt 31 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Increasing the upper cut‐off voltage of LiCoO 2 (LCO) is one of the most efficient strategies to gain high‐energy density for current lithium‐ion batteries. However, surface instability is expected to be exaggerated with increasing voltage arising from the high reactivity between the delithiated LCO and electrolytes, leading to serious safety concerns. This work is aimed to construct a physically and chemically stable phosphate‐rich cathode–electrolyte interface (CEI) on the LCO particles to mitigate this issue. This phosphate‐rich CEI is generated during the electrochemical activation by using fluoroethylene carbonate and 1,1,2,2‐tetrafluoroethyl‐2,2,3,3‐tetrafluoropropyletherare as the solvents. Both solvents also demonstrate high thermal stability, reducing the intrinsic flammability of the commercial organic electrolyte, thereby eliminating the safety concern in the LCO‐based systems upon high‐voltage operation. This stable CEI layer on the particle surface can also enhance the surface structure by blocking direct contact between LCO and electrolyte, improving the cycling stability. Therefore, by using the proposed electrolyte, the LCO cathode exhibits a high‐capacity retention of 76.1% after 200 cycles at a high cut‐off voltage of 4.6 V. This work provides a novel insight into the rational design of high‐voltage and safe battery systems by adopting the flame‐retardant electrolyte.

Schlagwörter

Stichwörter der Autor:innen

electrolytehigh-voltage LiCoO 2in situ interface modificationlithium-ion batteriesphosphate-rich interfacesafety

Autor:innen und Institutionen

  • State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan, Hubei Province, 430070, P. R. China.
  • International School of Materials Science and Engineering, School of Materials and Microelectronics, Wuhan University of Technology, Wuhan, Hubei Province, 430070, P. R. China.
  • College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, Zhejiang Province, 310027, P. R. China.

ORCID-Profile: Liguang Wang, Ya You, Jun Lu

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Yang, C., Liao, X., Zhou, X., Sun, C., Qu, R., Han, J., Zhao, Y., Wang, L., You, Y., & Lu, J. (2023). Phosphate‐Rich Interface for a Highly Stable and Safe 4.6 V LiCoO 2 Cathode. Advanced Materials, 35(14). https://doi.org/10.1002/adma.202210966

Vancouver

Yang C, Liao X, Zhou X, Sun C, Qu R, Han J, et al. Phosphate‐Rich Interface for a Highly Stable and Safe 4.6 V LiCoO 2 Cathode. Advanced Materials. 2023;35(14). doi:10.1002/adma.202210966

BibTeX
@article{Yang2023,
  author = {Yang, Chao and Liao, Xiaobin and Zhou, Xing and Sun, Congli and Qu, Rui and Han, Jin and Zhao, Yan and Wang, Liguang and You, Ya and Lu, Jun},
  title = {Phosphate‐Rich Interface for a Highly Stable and Safe 4.6 V LiCoO 2 Cathode},
  journal = {Advanced Materials},
  year = {2023},
  volume = {35},
  number = {14},
  doi = {10.1002/adma.202210966}
}
Kostenlos starten →