EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Bioinspired Processing: Complex Coacervates as Versatile Inks for 3D Bioprinting

Mohammad Khoonkari iD, Julien Es Sayed iD, Marta Oggioni iD, Armin Amirsadeghi iD, Peter Dijkstra, Daniele Parisi iD, Frank Kruyt iD, Patrick van Rijn iD, Małgorzata Katarzyna Włodarczyk-Biegun iD, Marleen Kamperman iD

Advanced Materials · 2023

DOI: 10.1002/adma.202210769 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, 2023. Verfasst von Mohammad Khoonkari und 9 weiteren Autor:innen. Beteiligte Einrichtung: Zernike Institute for Advanced Materials, University of Groningen, Nijenborgh 4, Groningen, 9747 AG, The Netherlands. Hauptthemen laut MEDLINE: Ink, Bioprinting. Die Arbeit wurde bisher 56-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: European Research Council, Nederlandse Organisatie voor Wetenschappelijk Onderzoek.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

3D bioprinting is a powerful fabrication technique in biomedical engineering, which is currently limited by the number of available materials that meet all physicochemical and cytocompatibility requirements for biomaterial inks. Inspired by the key role of coacervation in the extrusion and spinning of many natural materials, hyaluronic acid–chitosan complex coacervates are proposed here as tunable biomaterial inks. Complex coacervates are obtained through an associative liquid–liquid phase separation driven by electrostatic attraction between oppositely charged macromolecules. They offer bioactive properties and facile modulation of their mechanical properties through mild physicochemical changes in the environment, making them attractive for 3D bioprinting. Fine‐tuning the salt concentration, pH, and molecular weight of the constituent polymers results in biomaterial inks that are printable in air and water. The biomaterial ink, initially a viscoelastic fluid, transitions into a viscoelastic solid upon printing due to dehydration (for printing in air) or due to a change in pH and ionic composition (for printing in solution). Consequently, scaffolds printed using the complex coacervate inks are stable without the need for post‐printing processing. Fabricated cell culture scaffolds are cytocompatible and show long‐term topological stability. These results pave the way to a new class of easy‐to‐handle tunable biomaterials for biofabrication.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

InkBioprintingPrinting, Three-DimensionalRheologyBiocompatible MaterialsTissue ScaffoldsTissue EngineeringHydrogels

Stichwörter der Autor:innen

3D bioprintingbiomaterial inkscomplex coacervationin vitro scaffoldsrheology

Substanzen

Biocompatible MaterialsHydrogels

Autor:innen und Institutionen

  • Zernike Institute for Advanced Materials, University of Groningen, Nijenborgh 4, Groningen, 9747 AG, The Netherlands.
  • Department of Medical Oncology, University of Groningen, University Medical Center Groningen, Hanzeplein 1, Groningen, 9713 GZ, The Netherlands.
  • Engineering and Technology Institute Groningen (ENTEG), University of Groningen, Nijenborgh 4, Groningen, 9747 AG, The Netherlands.
  • Department of Biomedical Engineering-FB40, University of Groningen, University Medical Center Groningen, A. Deusinglaan 1, Groningen, 9713 AV, The Netherlands.
  • Biotechnology Centre, The Silesian University of Technology, Bolesława Krzywoustego 8, Gliwice, 44-100, Poland.

ORCID-Profile: Mohammad Khoonkari, Julien Es Sayed, Marta Oggioni, Armin Amirsadeghi, Daniele Parisi, Frank Kruyt, Patrick van Rijn, Małgorzata Katarzyna Włodarczyk-Biegun, Marleen Kamperman

Förderung

  • European Research Council
  • Nederlandse Organisatie voor Wetenschappelijk Onderzoek

Zitieren

APA

Khoonkari, M., Es Sayed, J., Oggioni, M., Amirsadeghi, A., Dijkstra, P., Parisi, D., Kruyt, F., van Rijn, P., Włodarczyk-Biegun, M. K., & Kamperman, M. (2023). Bioinspired Processing: Complex Coacervates as Versatile Inks for 3D Bioprinting. Advanced Materials. https://doi.org/10.1002/adma.202210769

Vancouver

Khoonkari M, Es Sayed J, Oggioni M, Amirsadeghi A, Dijkstra P, Parisi D, et al. Bioinspired Processing: Complex Coacervates as Versatile Inks for 3D Bioprinting. Advanced Materials. 2023. doi:10.1002/adma.202210769

BibTeX
@article{Khoonkari2023,
  author = {Khoonkari, Mohammad and Es Sayed, Julien and Oggioni, Marta and Amirsadeghi, Armin and Dijkstra, Peter and Parisi, Daniele and Kruyt, Frank and van Rijn, Patrick and Włodarczyk-Biegun, Małgorzata Katarzyna and Kamperman, Marleen},
  title = {Bioinspired Processing: Complex Coacervates as Versatile Inks for 3D Bioprinting},
  journal = {Advanced Materials},
  year = {2023},
  doi = {10.1002/adma.202210769}
}
Kostenlos starten →