Fluorinated Poly(aryl piperidinium) Membranes for Anion Exchange Membrane Fuel Cells
Advanced Materials · 2023-06 · 35 (26)
DOI: 10.1002/adma.202210432 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 11.05.2023. Verfasst von Xingyu Wu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory of Inorganic Synthesis and Catalysis (LSCI), Institute of Chemical Sciences and Engineering (ISIC), École Polytechnique Fédérale de Lausan…. Die Arbeit wurde bisher 182-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Technology Innovation Program, Korea Evaluation Institute of Industrial Technology.
Abstract (Originalsprache)
Anion‐exchange‐membrane fuel cells (AEMFCs) are a cost‐effective alternative to proton‐exchange‐membrane fuel cells (PEMFCs). The development of high‐performance and durable AEMFCs requires highly conductive and robust anion‐exchange membranes (AEMs). However, AEMs generally exhibit a trade‐off between conductivity and dimensional stability. Here, a fluorination strategy to create a phase‐separated morphological structure in poly(aryl piperidinium) AEMs is reported. The highly hydrophobic perfluoroalkyl side chains augment phase separation to construct interconnected hydrophilic channels for anion transport. As a result, these fluorinated PAP (FPAP) AEMs simultaneously possess high conductivity (>150 mS cm −1 at 80 °C) and high dimensional stability (swelling ratio 80 MPa and elongation at break >40%) and chemical stability (>2000 h in 3 m KOH at 80 °C). AEMFCs with a non‐precious Co–Mn spinel cathode using the present FPAP AEMs achieve an outstanding peak power density of 1.31 W cm −2 . The AEMs remain stable over 500 h of fuel cell operation at a constant current density of 0.2 A cm −2 .
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Laboratory of Inorganic Synthesis and Catalysis (LSCI), Institute of Chemical Sciences and Engineering (ISIC), École Polytechnique Fédérale de Lausanne (EPFL), Lausanne, 1015, Switzerland.
- Department of Energy Engineering, College of Engineering, Hanyang University, Seoul, 04763, South Korea.
- Laboratoire des Polymères, Institut des Matériaux and Institut des Sciences et Ingénierie Chimiques, École Polytechnique Fédérale de Lausanne (EPFL), Lausanne, 1015, Switzerland.
ORCID-Profile: Xile Hu
Förderung
- National Research Foundation of Korea
- Technology Innovation Program
- Korea Evaluation Institute of Industrial Technology
- Ministry of Trade, Industry & Energy
Zitieren
APA
Wu, X., Chen, N., Hu, C., Klok, H. A., Lee, Y. M., & Hu, X. (2023). Fluorinated Poly(aryl piperidinium) Membranes for Anion Exchange Membrane Fuel Cells. Advanced Materials, 35(26). https://doi.org/10.1002/adma.202210432
Vancouver
Wu X, Chen N, Hu C, Klok HA, Lee YM, Hu X. Fluorinated Poly(aryl piperidinium) Membranes for Anion Exchange Membrane Fuel Cells. Advanced Materials. 2023;35(26). doi:10.1002/adma.202210432
BibTeX
@article{Wu2023,
author = {Wu, Xingyu and Chen, Nanjun and Hu, Chuan and Klok, Harm-Anton and Lee, Young Moo and Hu, Xile},
title = {Fluorinated Poly(aryl piperidinium) Membranes for Anion Exchange Membrane Fuel Cells},
journal = {Advanced Materials},
year = {2023},
volume = {35},
number = {26},
doi = {10.1002/adma.202210432}
}
EUVIMED