Dihydroxyterephthalate—A Trojan Horse PET Counit for Facile Chemical Recycling
Advanced Materials · 2023-05 · 35 (21)
DOI: 10.1002/adma.202210154 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 28.03.2023. Verfasst von Ting-Han Lee und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Biological Engineering, Iowa State University, Ames, IA, 50011, USA. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Office of Energy Efficiency and Renewable Energy, National Science Foundation-Major Research Instrumentation Program (NSF-MRI).
Abstract (Originalsprache)
Here, low‐energy poly(ethylene terephthalate) (PET) chemical recycling in water: PET copolymers with diethyl 2,5‐dihydroxyterephthalate (DHTE) undergo selective hydrolysis at DHTE sites, autocatalyzed by neighboring group participation, is demonstrated. Liberated oligomeric subchains further hydrolyze until only small molecules remain. Poly(ethylene terephthalate‐ stat ‐2,5‐dihydroxyterephthalate) copolymers were synthesized via melt polycondensation and then hydrolyzed in 150–200 °C water with 0–1 wt% ZnCl 2 , or alternatively in simulated sea water. Degradation progress follows pseudo‐first order kinetics. With increasing DHTE loading, the rate constant increases monotonically while the thermal activation barrier decreases. The depolymerization products are ethylene glycol, terephthalic acid, 2,5‐dihydroxyterephthalic acid, and bis(2‐hydroxyethyl) terephthalate dimer, which could be used to regenerate virgin polymer. Composition‐optimized copolymers show a decrease of nearly 50% in the Arrhenius activation energy, suggesting a 6‐order reduction in depolymerization time under ambient conditions compared to that of PET homopolymer. This study provides new insight to the design of polymers for end‐of‐life while maintaining key properties like service temperature and mechanical properties. Moreover, this chemical recycling procedure is more environmentally friendly compared to traditional approaches since water is the only needed material, which is green, sustainable, and cheap.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical and Biological Engineering, Iowa State University, Ames, IA, 50011, USA.
- Department of Chemistry, Iowa State University, Ames, IA, 50011, USA.
ORCID-Profile: Ting-Han Lee, Michael Forrester, Tung-Ping Wang, Liyang Shen, Hengzhou Liu, Dhananjay Dileep, Baker Kuehl, Wenzhen Li, George Kraus, Eric Cochran
Förderung
- Office of Energy Efficiency and Renewable Energy
- National Science Foundation-Major Research Instrumentation Program (NSF-MRI)
Zitieren
APA
Lee, T. H., Forrester, M., Wang, T. P., Shen, L., Liu, H., Dileep, D., Kuehl, B., Li, W., Kraus, G., & Cochran, E. (2023). Dihydroxyterephthalate—A Trojan Horse PET Counit for Facile Chemical Recycling. Advanced Materials, 35(21). https://doi.org/10.1002/adma.202210154
Vancouver
Lee TH, Forrester M, Wang TP, Shen L, Liu H, Dileep D, et al. Dihydroxyterephthalate—A Trojan Horse PET Counit for Facile Chemical Recycling. Advanced Materials. 2023;35(21). doi:10.1002/adma.202210154
BibTeX
@article{Lee2023,
author = {Lee, Ting-Han and Forrester, Michael and Wang, Tung-Ping and Shen, Liyang and Liu, Hengzhou and Dileep, Dhananjay and Kuehl, Baker and Li, Wenzhen and Kraus, George and Cochran, Eric},
title = {Dihydroxyterephthalate—A Trojan Horse PET Counit for Facile Chemical Recycling},
journal = {Advanced Materials},
year = {2023},
volume = {35},
number = {21},
doi = {10.1002/adma.202210154}
}
EUVIMED