EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Versatile Assembly of Metal–Phenolic Network Foams Enabled by Tannin–Cellulose Nanofibers

Bruno D Mattos iD, Ya Zhu iD, Blaise L Tardy iD, Marco Beaumont iD, Ana Carolina R Ribeiro iD, André L Missio iD, Caio G Otoni iD, Orlando J Rojas iD

Advanced Materials · 2023-03 · 35 (12)

DOI: 10.1002/adma.202209685 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 12.02.2023. Verfasst von Bruno D Mattos und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Bioproducts and Biosystems, School of Chemical Engineering, Aalto University, Vuorimiehentie 1, FI-00076, Espoo, Finland. Die Arbeit wurde bisher 91-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Canada Excellence Research Chair Program, Research Support Foundation of the State of RS, Canada Foundation for Innovation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Metal–phenolic network (MPN) foams are prepared using colloidal suspensions of tannin‐containing cellulose nanofibers (CNFs) that are ice‐templated and thawed in ethanolic media in the presence of metal nitrates. The MPN facilitates the formation of solid foams by air drying, given the strength and self‐supporting nature of the obtained tannin–cellulose nanohybrid structures. The porous characteristics and (dry and wet) compression strength of the foams are rationalized by the development of secondary, cohesive metal‐phenolic layers combined with a hydrogen bonding network involving the CNF. The shrinkage of the MPN foams is as low as 6% for samples prepared with 2.5–10% tannic acid (or condensed tannin at 2.5%) with respect to CNF content. The strength of the MPN foams reaches a maximum at 10% tannic acid (using Fe (III) ions), equivalent to a compressive strength 70% higher than that produced with tannin‐free CNF foams. Overall, a straightforward framework is introduced to synthesize MPN foams whose physical and mechanical properties are tailored by the presence of tannins as well as the metal ion species that enable the metal–phenolic networking. Depending on the metal ion, the foams are amenable to modification according to the desired application.

Schlagwörter

Stichwörter der Autor:innen

cellulose nanofibersin situ freeze-thawing-dryingmetal-phenolic coordinationsolid foams

Autor:innen und Institutionen

  • Department of Bioproducts and Biosystems, School of Chemical Engineering, Aalto University, Vuorimiehentie 1, FI-00076, Espoo, Finland.
  • Technological Development Center, Materials Science and Engineering (PPGCEM), Federal University of Pelotas (UFPel), Gomes Carneiro 1, Pelotas, RS, 96010-610, Brazil.
  • Department of Chemical Engineering, Research and Innovation Center on CO2 and Hydrogen, Center for Membrane and Advanced Water Technology, Khalifa University of Science and Technology, P.O. Box 127788, Abu Dhabi, United…
  • Department of Chemistry, Institute of Chemistry of Renewable Resources, University of Natural Resources and Life Sciences, Konrad-Lorenz-Str. 24, 3430, Tulln, Austria.
  • Department of Materials Engineering (DEMa), Federal University of São Carlos (UFSCar), Rod. Washington Luís km 235, São Carlos, SP, 13565-905, Brazil.
  • Bioproducts Institute, Department of Chemical and Biological Engineering, Department of Chemistry and Department of Wood Science, University of British Columbia, Vancouver, British Columbia, V6T 1Z4, Canada.

ORCID-Profile: Bruno D Mattos, Ya Zhu, Blaise L Tardy, Marco Beaumont, Ana Carolina R Ribeiro, André L Missio, Caio G Otoni, Orlando J Rojas

Förderung

  • The Canada Excellence Research Chair Program
  • Research Support Foundation of the State of RS
  • Canada Foundation for Innovation
  • The São Paulo Research Foundation
  • European Research Council

Zitieren

APA

Mattos, B. D., Zhu, Y., Tardy, B. L., Beaumont, M., Ribeiro, A. C. R., Missio, A. L., Otoni, C. G., & Rojas, O. J. (2023). Versatile Assembly of Metal–Phenolic Network Foams Enabled by Tannin–Cellulose Nanofibers. Advanced Materials, 35(12). https://doi.org/10.1002/adma.202209685

Vancouver

Mattos BD, Zhu Y, Tardy BL, Beaumont M, Ribeiro ACR, Missio AL, et al. Versatile Assembly of Metal–Phenolic Network Foams Enabled by Tannin–Cellulose Nanofibers. Advanced Materials. 2023;35(12). doi:10.1002/adma.202209685

BibTeX
@article{Mattos2023,
  author = {Mattos, Bruno D and Zhu, Ya and Tardy, Blaise L and Beaumont, Marco and Ribeiro, Ana Carolina R and Missio, André L and Otoni, Caio G and Rojas, Orlando J},
  title = {Versatile Assembly of Metal–Phenolic Network Foams Enabled by Tannin–Cellulose Nanofibers},
  journal = {Advanced Materials},
  year = {2023},
  volume = {35},
  number = {12},
  doi = {10.1002/adma.202209685}
}
Kostenlos starten →