EUVIMEDEUVIMED entdecken
Crossref

A 3D Framework with Li 3 N–Li 2 S Solid Electrolyte Interphase and Fast Ion Transfer Channels for a Stabilized Lithium‐Metal Anode

Shuyan Ni iD, Mengtian Zhang, Chuang Li, Runhua Gao, Jinzhi Sheng, Xin Wu, Guangmin Zhou iD

Advanced Materials · 2023-02 · 35 (8)

DOI: 10.1002/adma.202209028 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 23.12.2022. Verfasst von Shuyan Ni und 6 weiteren Autor:innen. Beteiligte Einrichtung: Tsinghua-Berkeley Shenzhen Institute & Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, 518055, China. Die Arbeit wurde bisher 149-mal zitiert (Crossref) und nennt 63 Literaturangaben. Gefördert von: National Key Research and Development Program of China, Joint Funds of the National Natural Science Foundation of China, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Li‐metal anode has been recognized as the most promising anode for its high theoretical capacity and low reduction potential. However, the major drawbacks of Li metal, such as high reactivity and large volume expansion, can lead to dendrite growth and solid electrolyte interface (SEI) fracture. An in situ artificial inorganic SEI layer, consisting of lithium nitride and lithium sulfide, is herein reported to address the dendrite growth issues. Porous graphene oxide films are doped with sulfur and nitrogen (denoted as SNGO) to work as an effective lithium host. The SNGO film enables the in situ formation of an inorganic‐rich SEI layer, which facilitates the transport of Li‐ions, improves SEI mechanical strength, and avoids SEI fracture. In addition, COMSOL simulation results reveal that the microchannels fabricated by the 3D printing technique further shorten the Li‐ion transfer pathways and homogenize heat and stress distribution in the batteries. As a result, the assembled anode shows low capacity fading of 0.1% per cycle at 2 C rate with the sulfur cathode. In addition, the high lithium utilization of the SNGO host enables the anode to provide a stable capacity at low negative/positive electrode ratios under 3 in LiS batteries.

Schlagwörter

Stichwörter der Autor:innen

3D printinggraphene oxideion transfer channelslithium-metal anodessolid electrolyte interphase

Autor:innen und Institutionen

  • Tsinghua-Berkeley Shenzhen Institute & Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, 518055, China.

ORCID-Profile: Shuyan Ni, Guangmin Zhou

Förderung

  • National Key Research and Development Program of China
  • Joint Funds of the National Natural Science Foundation of China
  • National Natural Science Foundation of China
  • Shenzhen Stabilization Support Program
  • Overseas Research Cooperation Fund of Tsinghua Shenzhen International Graduate School
  • Shenzhen Science and Technology Program

Zitieren

APA

Ni, S., Zhang, M., Li, C., Gao, R., Sheng, J., Wu, X., & Zhou, G. (2023). A 3D Framework with Li 3 N–Li 2 S Solid Electrolyte Interphase and Fast Ion Transfer Channels for a Stabilized Lithium‐Metal Anode. Advanced Materials, 35(8). https://doi.org/10.1002/adma.202209028

Vancouver

Ni S, Zhang M, Li C, Gao R, Sheng J, Wu X, et al. A 3D Framework with Li 3 N–Li 2 S Solid Electrolyte Interphase and Fast Ion Transfer Channels for a Stabilized Lithium‐Metal Anode. Advanced Materials. 2023;35(8). doi:10.1002/adma.202209028

BibTeX
@article{Ni2023,
  author = {Ni, Shuyan and Zhang, Mengtian and Li, Chuang and Gao, Runhua and Sheng, Jinzhi and Wu, Xin and Zhou, Guangmin},
  title = {A 3D Framework with Li 3 N–Li 2 S Solid Electrolyte Interphase and Fast Ion Transfer Channels for a Stabilized Lithium‐Metal Anode},
  journal = {Advanced Materials},
  year = {2023},
  volume = {35},
  number = {8},
  doi = {10.1002/adma.202209028}
}
Kostenlos starten →