EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

All‐Printed Roll‐to‐Roll Perovskite Photovoltaics Enabled by Solution‐Processed Carbon Electrode

David Beynon iD, Ershad Parvazian iD, Katherine Hooper iD, James McGettrick iD, Rahul Patidar iD, Tom Dunlop iD, Zhengfei Wei iD, Peter Davies iD, Rodrigo Garcia-Rodriguez iD, Matt Carnie iD, Matthew Davies iD, Trystan Watson iD

Advanced Materials · 2023-04 · 35 (16)

DOI: 10.1002/adma.202208561 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 14.03.2023. Verfasst von David Beynon und 11 weiteren Autor:innen. Beteiligte Einrichtung: SPECIFIC IKC, Faculty of Science and Engineering, Swansea University, Fabian Way, Swansea, SA1 8EN, UK. Die Arbeit wurde bisher 120-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: SPECIFIC Innovation and Knowledge Centre, Innovate UK, EPSRC.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Perovskite photovoltaics have shown great promise in device efficiency but also the promise of scalability through solution‐processed manufacture. Efforts to scale perovskites have been taken through printable mesoporous scaffolds and slot die coating of flexible substrates roll‐to‐roll (R2R). However, to date there has been no demonstration of entirely R2R‐coated devices due to the lack of a compatible solution‐processable back electrode; instead, high‐value evaporated metal contacts are employed as a post process. Here, in this study, the combination of a low‐temperature device structure and R2R‐compatible solution formulations is employed to make a fully R2R printable device architecture overcoming interlayer incompatibilities and recombination losses. Therefore, the n–i–p device structure of SnO 2 /perovskite/poly(3,4‐ethylenedioxythiophene)/carbon is employed to form an ohmic contact between a p‐type semiconductor and printable carbon electrode. In particular, the results show that the small‐scale device efficiencies of 13–14% are achieved, matching the device performance of evaporated gold electrodes. Also, this entirely R2R‐coated perovskite prototype represents a game changer, reaching over 10% (10.8) stabilized power conversion efficiency with unencapsulated long‐term stability retaining 84% of its original efficiency over 1000 h under 70% RH and 25 °C.

Schlagwörter

Stichwörter der Autor:innen

carbon electrodesperovskiteroll-to-rollscale-upslot die

Autor:innen und Institutionen

  • SPECIFIC IKC, Faculty of Science and Engineering, Swansea University, Fabian Way, Swansea, SA1 8EN, UK.
  • AIM, Faculty of Science and Engineering, Swansea University, Fabian Way, Swansea, SA1 8EN, UK.
  • IMPACT, Faculty of Science and Engineering, Swansea University, Fabian Way, Swansea, SA1 8EN, UK.

ORCID-Profile: David Beynon, Ershad Parvazian, Katherine Hooper, James McGettrick, Rahul Patidar, Tom Dunlop, Zhengfei Wei, Peter Davies, Rodrigo Garcia-Rodriguez, Matt Carnie, Matthew Davies, Trystan Watson

Förderung

  • SPECIFIC Innovation and Knowledge Centre
  • Innovate UK
  • EPSRC
  • European Regional Development Fund
  • Engineering and Physical Sciences Research Council

Zitieren

APA

Beynon, D., Parvazian, E., Hooper, K., McGettrick, J., Patidar, R., Dunlop, T., Wei, Z., Davies, P., Garcia-Rodriguez, R., Carnie, M., Davies, M., & Watson, T. (2023). All‐Printed Roll‐to‐Roll Perovskite Photovoltaics Enabled by Solution‐Processed Carbon Electrode. Advanced Materials, 35(16). https://doi.org/10.1002/adma.202208561

Vancouver

Beynon D, Parvazian E, Hooper K, McGettrick J, Patidar R, Dunlop T, et al. All‐Printed Roll‐to‐Roll Perovskite Photovoltaics Enabled by Solution‐Processed Carbon Electrode. Advanced Materials. 2023;35(16). doi:10.1002/adma.202208561

BibTeX
@article{Beynon2023,
  author = {Beynon, David and Parvazian, Ershad and Hooper, Katherine and McGettrick, James and Patidar, Rahul and Dunlop, Tom and Wei, Zhengfei and Davies, Peter and Garcia-Rodriguez, Rodrigo and Carnie, Matt and Davies, Matthew and Watson, Trystan},
  title = {All‐Printed Roll‐to‐Roll Perovskite Photovoltaics Enabled by Solution‐Processed Carbon Electrode},
  journal = {Advanced Materials},
  year = {2023},
  volume = {35},
  number = {16},
  doi = {10.1002/adma.202208561}
}
Kostenlos starten →