Multicolor and 3D Holography Generated by Inverse‐Designed Single‐Cell Metasurfaces
Advanced Materials · 2023-04 · 35 (17)
DOI: 10.1002/adma.202208520 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 18.03.2023. Verfasst von Sunae So und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, 37673, Republic of Korea. Die Arbeit wurde bisher 279-mal zitiert (Crossref) und nennt 52 Literaturangaben. Gefördert von: National Research Foundation of Korea, POSCO, Institute of Information & Communications Technology Planning & Evaluation (IITP).
Abstract (Originalsprache)
Metasurface‐generated holography has emerged as a promising route for fully reproducing vivid scenes by manipulating the optical properties of light using ultra‐compact devices. However, achieving multiple holographic images using a single metasurface is still difficult due to the capacity limit of a single meta‐atom. In this work, an inverse design method based on gradient‐descent optimization is presented to encode multiple pieces of holographic information into a single metasurface. The proposed method allows the inverse design of single‐cell metasurfaces without the need for complex meta‐atom design strategies, facilitating high‐throughput fabrication using broadband low‐loss materials. By exploiting the proposed design method, both multiplane red‐green‐blue (RGB) color and three‐dimensional (3D) holograms are designed and experimentally demonstrated. Multiplane RGB color holograms with nine distinct holograms are achieved, which demonstrate the state‐of‐the‐art data capacity of a phase‐only metasurface. The first experimental demonstration of metasurface‐generated 3D holograms with completely independent and distinct images in each plane is also presented. The current research findings provide a viable route for practical metasurface‐generated holography by demonstrating the high‐density holography produced by a single metasurface. It is expected to ultimately lead to optical storage, display, and full‐color imaging applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, 37673, Republic of Korea.
- Graduate School of Artificial Intelligence, Pohang University of Science and Technology (POSTECH), Pohang, 37673, Republic of Korea.
- Department of Electro-Mechanical Systems Engineering, Korea University, Sejong, 30019, Republic of Korea.
- Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, 37673, Republic of Korea.
- POSCO-POSTECH-RIST Convergence Research Center for Flat Optics and Metaphotonics, Pohang, 37673, Republic of Korea.
- National Institute of Nanomaterials Technology (NINT), Pohang, 37673, Republic of Korea.
ORCID-Profile: Junsuk Rho
Förderung
- National Research Foundation of Korea
- POSCO
- Institute of Information & Communications Technology Planning & Evaluation (IITP)
- Pohang University of Science and Technology
- Chung Mong-Koo Foundation
Zitieren
APA
So, S., Kim, J., Badloe, T., Lee, C., Yang, Y., Kang, H., & Rho, J. (2023). Multicolor and 3D Holography Generated by Inverse‐Designed Single‐Cell Metasurfaces. Advanced Materials, 35(17). https://doi.org/10.1002/adma.202208520
Vancouver
So S, Kim J, Badloe T, Lee C, Yang Y, Kang H, et al. Multicolor and 3D Holography Generated by Inverse‐Designed Single‐Cell Metasurfaces. Advanced Materials. 2023;35(17). doi:10.1002/adma.202208520
BibTeX
@article{So2023,
author = {So, Sunae and Kim, Joohoon and Badloe, Trevon and Lee, Chihun and Yang, Younghwan and Kang, Hyunjung and Rho, Junsuk},
title = {Multicolor and 3D Holography Generated by Inverse‐Designed Single‐Cell Metasurfaces},
journal = {Advanced Materials},
year = {2023},
volume = {35},
number = {17},
doi = {10.1002/adma.202208520}
}
EUVIMED