Embedded 3D Printing of Multimaterial Polymer Lattices via Graph‐Based Print Path Planning
Advanced Materials · 2023-02 · 35 (5)
DOI: 10.1002/adma.202206958 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 18.12.2022. Verfasst von Robert D Weeks und 3 weiteren Autor:innen. Beteiligte Einrichtung: John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA, 02138, USA. Die Arbeit wurde bisher 63-mal zitiert (Crossref) und nennt 89 Literaturangaben. Gefördert von: NSF, Harvard Materials Research Science and Engineering Center Grant (MRSEC), NSF Designing Materials to Revolutionize and Engineer our Future.
Abstract (Originalsprache)
Recent advances in computational design and 3D printing enable the fabrication of polymer lattices with high strength‐to‐weight ratio and tailored mechanics. To date, 3D lattices composed of monolithic materials have primarily been constructed due to limitations associated with most commercial 3D printing platforms. Here, freeform fabrication of multi‐material polymer lattices via embedded three‐dimensional (EMB3D) printing is demonstrated. An algorithm is developed first that generates print paths for each target lattice based on graph theory. The effects of ink rheology on filamentary printing and the effects of the print path on resultant mechanical properties are then investigated. By co‐printing multiple materials with different mechanical properties, a broad range of periodic and stochastic lattices with tailored mechanical responses can be realized opening new avenues for constructing architected matter.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA, 02138, USA.
- Wyss Institute for Biologically Inspired Engineering, Harvard University, Cambridge, MA, 02138, USA.
ORCID-Profile: Jennifer A Lewis
Förderung
- NSF
- Harvard Materials Research Science and Engineering Center Grant (MRSEC)
- NSF Designing Materials to Revolutionize and Engineer our Future
- National Science Foundation
Zitieren
APA
Weeks, R. D., Truby, R. L., Uzel, S. G. M., & Lewis, J. A. (2023). Embedded 3D Printing of Multimaterial Polymer Lattices via Graph‐Based Print Path Planning. Advanced Materials, 35(5). https://doi.org/10.1002/adma.202206958
Vancouver
Weeks RD, Truby RL, Uzel SGM, Lewis JA. Embedded 3D Printing of Multimaterial Polymer Lattices via Graph‐Based Print Path Planning. Advanced Materials. 2023;35(5). doi:10.1002/adma.202206958
BibTeX
@article{Weeks2023,
author = {Weeks, Robert D and Truby, Ryan L and Uzel, Sebastien G M and Lewis, Jennifer A},
title = {Embedded 3D Printing of Multimaterial Polymer Lattices via Graph‐Based Print Path Planning},
journal = {Advanced Materials},
year = {2023},
volume = {35},
number = {5},
doi = {10.1002/adma.202206958}
}
EUVIMED