Plasmonic Fluorescence Enhancement in Diagnostics for Clinical Tests at Point‐of‐Care: A Review of Recent Technologies
Advanced Materials · 2023-08 · 35 (34)
DOI: 10.1002/adma.202107986 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Advanced Materials, online erschienen am 24.04.2022. Verfasst von Daria Semeniak und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, Duke University, Durham, NC, 27708, USA. Hauptthemen laut MEDLINE: Biosensing Techniques, Nanostructures. Die Arbeit wurde bisher 182-mal zitiert (Crossref) und nennt 176 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: NHLBI NIH HHS, NIH HHS, National Institutes of Health.
Abstract (Originalsprache)
Fluorescence‐based biosensors have widely been used in the life‐sciences and biomedical applications due to their low limit of detection and a diverse selection of fluorophores that enable simultaneous measurements of multiple biomarkers. Recent research effort has been made to implement fluorescent biosensors into the exploding field of point‐of‐care testing (POCT), which uses cost‐effective strategies for rapid and affordable diagnostic testing. However, fluorescence‐based assays often suffer from their feeble signal at low analyte concentrations, which often requires sophisticated, costly, and bulky instrumentation to maintain high detection sensitivity. Metal‐ and metal oxide‐based nanostructures offer a simple solution to increase the output signal from fluorescent biosensors due to the generation of high field enhancements close to a metal or metal oxide surface, which has been shown to improve the excitation rate, quantum yield, photostability, and radiation pattern of fluorophores. This article provides an overview of existing biosensors that employ various strategies for fluorescence enhancement via nanostructures and have demonstrated the potential for use as POCT. Biosensors using nanostructures such as planar substrates, freestanding nanoparticles, and metal–dielectric–metal nanocavities are discussed with an emphasis placed on technologies that have shown promise towards POCT applications without the need for centralized laboratories.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Biomedical Engineering, Duke University, Durham, NC, 27708, USA.
- Department of Electrical and Computer Engineering, Duke University, Durham, NC, 27708, USA.
ORCID-Profile: Ashutosh Chilkoti, Maiken H Mikkelsen
Förderung
- NHLBI NIH HHS
- NIH HHS
- National Institutes of Health
- Combat Casualty Care Research Program
Zitieren
APA
Semeniak, D., Cruz, D. F., Chilkoti, A., & Mikkelsen, M. H. (2023). Plasmonic Fluorescence Enhancement in Diagnostics for Clinical Tests at Point‐of‐Care: A Review of Recent Technologies. Advanced Materials, 35(34). https://doi.org/10.1002/adma.202107986
Vancouver
Semeniak D, Cruz DF, Chilkoti A, Mikkelsen MH. Plasmonic Fluorescence Enhancement in Diagnostics for Clinical Tests at Point‐of‐Care: A Review of Recent Technologies. Advanced Materials. 2023;35(34). doi:10.1002/adma.202107986
BibTeX
@article{Semeniak2023,
author = {Semeniak, Daria and Cruz, Daniela F and Chilkoti, Ashutosh and Mikkelsen, Maiken H},
title = {Plasmonic Fluorescence Enhancement in Diagnostics for Clinical Tests at Point‐of‐Care: A Review of Recent Technologies},
journal = {Advanced Materials},
year = {2023},
volume = {35},
number = {34},
doi = {10.1002/adma.202107986}
}
EUVIMED