TiCoCr‐Based Multi‐Principal Element Alloys for Biomedical Applications
Advanced Healthcare Materials · 30.10.2026
DOI: 10.1002/adhm.71918 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Healthcare Materials, online erschienen am 30.10.2026. Verfasst von Nanda Kishore Karnam und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Engineering Sciences and Technology, University of Hyderabad, Hyderabad, Telangana, India. Die Arbeit nennt 80 Literaturangaben. Gefördert von: Government of India.
Abstract (Originalsprache)
Next‐generation biomedical implants require materials with excellent wear resistance, corrosion resistance, and biocompatibility. This study developed two novel multi‐principal element alloys (MPEAs) based on the TiCoCr composition (equiatomic and non‐equiatomic) with ultra‐high hardness, excellent wear resistance, corrosion stability, and biocompatibility. The as‐cast microstructures revealed a multiphase combination of Ti‐rich hexagonal closed packing (HCP), C 14 Laves, and face‐centered cubic (FCC) phases. Upon heat treatment, equiatomic (Ti 33 Co 33 Cr 33 ) MPEA developed two major body‐centered (BCC) phases and a minor HCP phase, whereas heat treatment of non‐equiatomic (Ti 50 Co 25 Cr 25 ) MPEA revealed one BCC and C 14 Laves phase. The hardness of both MPEAs was slightly reduced after heat treatment. Wear and corrosion tests conducted in Hanks' balanced salt solution (HBSS) at 37°C on heat‐treated MPEAs demonstrated improved tribological and corrosion behavior, with reduced wear and a lower coefficient of friction (COF). Electrochemical analysis indicated superior corrosion resistance, particularly for Ti 33 Co 33 Cr 33 MPEA. With respect to biocompatibility, both MPEAs demonstrated excellent cell adhesion and proliferation properties. Cell viability improved significantly, increasing from the control (100%) to ∼105% and 115% after 3 and 5 days, respectively. The combined results highlight the strong potential of these MPEAs for biomedical applications, offering a unique balance of high “density‐normalized” hardness, excellent corrosion resistance, and biological compatibility for future implant solutions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Engineering Sciences and Technology, University of Hyderabad, Hyderabad, Telangana, India.
- Department of Materials Science and Engineering, Indian Institute of Technology Delhi, New Delhi, India.
- School of Minerals, Metallurgical and Materials Engineering, Indian Institute of Technology Bhubaneswar, Odisha, India.
- Process Engineering Division, CSIR-Central Electrochemical Research Institute, Karaikudi, Tamil Nadu, India.
- Academy of Scientific and Innovative Research (AcSIR), Ghaziabad, India.
ORCID-Profile: Nanda Kishore Karnam, Junaid Syed, Nitya Nand Gosvami, Ravishankar Suman, Srikant Gollapudi, Koteswararao V Rajulapati
Förderung
- Government of India
Zitieren
APA
Karnam, N. K., Syed, J., Gosvami, N. N., Suman, R., Gollapudi, S., Mathew, A. M., Pattanayak, D. K., & Rajulapati, K. V. (2026). TiCoCr‐Based Multi‐Principal Element Alloys for Biomedical Applications. Advanced Healthcare Materials. https://doi.org/10.1002/adhm.71918
Vancouver
Karnam NK, Syed J, Gosvami NN, Suman R, Gollapudi S, Mathew AM, et al. TiCoCr‐Based Multi‐Principal Element Alloys for Biomedical Applications. Advanced Healthcare Materials. 2026. doi:10.1002/adhm.71918
BibTeX
@article{Karnam2026,
author = {Karnam, Nanda Kishore and Syed, Junaid and Gosvami, Nitya Nand and Suman, Ravishankar and Gollapudi, Srikant and Mathew, Ann Mary and Pattanayak, Deepak K and Rajulapati, Koteswararao V},
title = {TiCoCr‐Based Multi‐Principal Element Alloys for Biomedical Applications},
journal = {Advanced Healthcare Materials},
year = {2026},
doi = {10.1002/adhm.71918}
}
EUVIMED