Biomimetic Vascular Scaffold with Seamless Electrospun Aligned Nanofiber Conduit and 3D‐Printed Coil Reinforcement
Advanced Healthcare Materials · 2026-08 · 15 (30)
DOI: 10.1002/adhm.71412 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Healthcare Materials, online erschienen am 14.07.2026. Verfasst von Seyed Aliakbar Hosseini Toopghara und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Medical Engineering Joint Research, Chonnam National University, Gwangju, Republic of Korea. Hauptthemen laut MEDLINE: Nanofibers, Printing, Three-Dimensional, Tissue Scaffolds, Blood Vessel Prosthesis. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 88 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Research Foundation of Korea, South Korea, funded by the Korean government (MSIP).
Abstract (Originalsprache)
Although the clinical need for bioengineered blood vessels is growing, options for vascular conduits are currently limited. The aim of this study is to develop a novel scaffold fabrication method for use as a small‐diameter vascular graft and to evaluate its biocompatibility, cell attachment, and mechanical properties. This scaffold consists of a tubular polycaprolactone parallel nanofiber section (a seamless tube of fibers aligned along the long axis) reinforced with 4‐axis 3D printed spiral polycaprolactone. The final structure was coated with collagen and cultured with various cells. High‐resolution field emission‐scanning electron microscopy images confirm the successful fabrication of seamless parallel fibrous tubes (as small as 300 µm) and fusion of the fibers to the spiral reinforcement. Biocompatibility assays on the scaffold indicate no cell toxicity, and the parallel fibers successfully oriented the cells cultured inside the tube, thereby mimicking their natural orientation in vascular tissue. The spiral reinforcement was successfully attached to the inner tube, which significantly improved the tube's mechanical strength compared to the non‐reinforced groups. These results suggest that this new fabrication method of polycaprolactone/collagen parallel tubular nanofibers reinforced by using 4‐axis 3D printing techniques could play a promising role in future bioengineered vascular tissues or other tubular tissues.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Medical Engineering Joint Research, Chonnam National University, Gwangju, Republic of Korea.
- Department of Prosthodontics, School of Dentistry, Chonnam National University, Gwangju, Republic of Korea.
- Dental Science Research Institute, Department of Oral Physiology, School of Dentistry, Chonnam National University, Gwangju, Republic of Korea.
- Department of Pharmacology and Dental Therapeutics, School of Dentistry, Chonnam National University, Gwangju, Republic of Korea.
- Dental 4D Research Center, Chonnam National University, Gwangju, Republic of Korea.
- Biomedical Evaluation and Research Center, School of Dentistry, Chonnam National University, Gwangju, Republic of Korea.
ORCID-Profile: Seyed Aliakbar Hosseini Toopghara, Won-Jae Kim
Förderung
- National Research Foundation of Korea, South Korea, funded by the Korean government (MSIP)
Zitieren
APA
Hosseini Toopghara, S. A., Hwang, Y. O., Kim, I. A., Hyun, C. I., Ryu, H., Kim, W. J., Koh, J. T., Lim, H. P., Kang, J. H., & Park, S. W. (2026). Biomimetic Vascular Scaffold with Seamless Electrospun Aligned Nanofiber Conduit and 3D‐Printed Coil Reinforcement. Advanced Healthcare Materials, 15(30). https://doi.org/10.1002/adhm.71412
Vancouver
Hosseini Toopghara SA, Hwang YO, Kim IA, Hyun CI, Ryu H, Kim WJ, et al. Biomimetic Vascular Scaffold with Seamless Electrospun Aligned Nanofiber Conduit and 3D‐Printed Coil Reinforcement. Advanced Healthcare Materials. 2026;15(30). doi:10.1002/adhm.71412
BibTeX
@article{HosseiniToopghara2026,
author = {Hosseini Toopghara, Seyed Aliakbar and Hwang, Young-Ook and Kim, In A and Hyun, Che-I and Ryu, Hochung and Kim, Won-Jae and Koh, Jeong-Tae and Lim, Hyun-Pil and Kang, Jin-Ho and Park, Sang-Won},
title = {Biomimetic Vascular Scaffold with Seamless Electrospun Aligned Nanofiber Conduit and 3D‐Printed Coil Reinforcement},
journal = {Advanced Healthcare Materials},
year = {2026},
volume = {15},
number = {30},
doi = {10.1002/adhm.71412}
}
EUVIMED