EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Microneedle Stent for Intravascular Anchoring Effect

GeonA Kim, Dong-Sung Won, Dong-Su Kim, Yeonggeol Seo, Dong-Weon Lee, Jung-Hoon Park, KangJu Lee iD

Advanced Healthcare Materials · 2026-05 · 15 (18)

DOI: 10.1002/adhm.202505587 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Healthcare Materials, online erschienen am 11.02.2026. Verfasst von GeonA Kim und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Incheon National University, Incheon, Republic of Korea. Hauptthemen laut MEDLINE: Stents, Needles. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Research Foundation of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cardiovascular diseases remain the leading cause of death worldwide, largely due to sudden blockage or narrowing of coronary arteries, with myocardial infarction and angina as common outcomes. Stent implantation is a widely used intervention to restore vessel patency, offering advantages such as reduced invasiveness, faster recovery, and improved patient comfort compared to surgery. However, complications including in‐stent restenosis, elastic recoil, and stent migration persist. Among these, stent dislodgement poses a particularly severe risk, underscoring the need for improved anchoring strategies. Microneedles (MNs), recognized for their minimal invasiveness and strong tissue‐fixation capability, present an attractive but unexplored approach for vascular stents. Here, we report a novel microneedle stent (MNS) in which MN arrays were conformally integrated onto the surface of a 3D‐printed polycaprolactone stent using a UV‐curable resin transfer‐molding process. The MNs exhibited high structural fidelity, tunable mechanical strength, and stable adhesion to the stent surface, governed by UV‐crosslinking conditions. In vitro flow studies using a vessel phantom and peristaltic pump demonstrated robust anchoring under physiological conditions. Furthermore, in vivo implantation confirmed enhanced vascular fixation without adverse inflammatory responses. This work represents the first integration of MNs into vascular stents, offering a promising strategy to improve stent stability and clinical outcomes.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

StentsNeedlesAnimalsPolyestersHumansPrinting, Three-DimensionalMicroneedle Drug Delivery

Stichwörter der Autor:innen

3d printed PCL stentanchoring effectconformal transfer moldingmicroneedlestent dislodgement

Substanzen

Polyesterspolycaprolactone

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Incheon National University, Incheon, Republic of Korea.
  • Biomedical Engineering Research Center, Asan Institute for Life Sciences, Asan Medical Center, Asan Medical Center, Seoul, Republic of Korea.
  • National Center for Nano Process & Equipments, Energy & Nano Technology Group, Korea Institute of Industrial Technology (KITECH), Gwangju, Republic of Korea.
  • Advanced Medical Device Research Center for Cardiovascular Disease, Chonnam National University, Gwangju, Republic of Korea.
  • MEMS and Nanotechnology Laboratory, School of Mechanical Engineering, Chonnam National University, Gwangju, Republic of Korea.
  • Center for Next-Generation Sensor Research and Development, Chonnam National University, Gwangju, Republic of Korea.

ORCID-Profile: KangJu Lee

Förderung

  • National Research Foundation of Korea

Zitieren

APA

Kim, G., Won, D. S., Kim, D. S., Seo, Y., Lee, D. W., Park, J. H., & Lee, K. (2026). Microneedle Stent for Intravascular Anchoring Effect. Advanced Healthcare Materials, 15(18). https://doi.org/10.1002/adhm.202505587

Vancouver

Kim G, Won DS, Kim DS, Seo Y, Lee DW, Park JH, et al. Microneedle Stent for Intravascular Anchoring Effect. Advanced Healthcare Materials. 2026;15(18). doi:10.1002/adhm.202505587

BibTeX
@article{Kim2026,
  author = {Kim, GeonA and Won, Dong-Sung and Kim, Dong-Su and Seo, Yeonggeol and Lee, Dong-Weon and Park, Jung-Hoon and Lee, KangJu},
  title = {Microneedle Stent for Intravascular Anchoring Effect},
  journal = {Advanced Healthcare Materials},
  year = {2026},
  volume = {15},
  number = {18},
  doi = {10.1002/adhm.202505587}
}
Kostenlos starten →