Natural‐Based Nanocomposite Ink Engineering for Seamless Multi‐Material Integration in Extrusion‐Based 3D Printing
Advanced Healthcare Materials · 2026
DOI: 10.1002/adhm.202502733 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Healthcare Materials, 2026. Verfasst von João R Maia und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, Aveiro, 3810-193, Portugal. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Nanocomposites, Ink, Tissue Engineering. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 90 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union (EU) Horizon 2020 for the project InterLynk, Fundação para a Ciência e Tecnologia for the following grants, CICECO-Aveiro Institute of Materials.
Abstract (Originalsprache)
Multi‐tissue regeneration remains a critical clinical challenge due to the lack of solutions that can replicate the hierarchical heterogeneity of such complex interfaces. While biofabrication approaches, such as extrusion‐based, allow replicating robust, biomimetic, and layered designs, constructs are usually hindered by inadequate phase/layer integration, poor filler dispersion, and mismatched rheological and mechanical performances. This study introduces an ink engineering strategy as a solution for integrating natural‐based nanocomposites in multi‐tissue regenerative approaches. For that, two photocrosslinkable natural matrices: a protein–bovine serum albumin methacrylate (BSAMA), and a polysaccharide–hyaluronic acid methacrylate (HAMA)–are selected for their complementary mechanical and cytocompatibility profiles. Bioactive glass nanoparticles, known for osteoconductive potential, are functionalized and covalently immobilized within both matrices through EDC/NHS chemical coupling. This primary crosslinking enables uniform distribution of inorganic phases, unlocking tuneable rheological properties, adequate for extrusion 3D printing. Then, a secondary crosslinking, leveraging the photo‐responsive moieties for post‐printing photocuring, enables the obtention of seamlessly integrated robust multi‐material constructs. Overall, BSAMA‐based inks offer higher cytocompatibility, while HAMA‐based inks provide superior mechanical strength. Their combination in multi‐material constructs supports hASCs’ metabolic activity and proliferation, confirming bioactivity and cytocompatibility; and finite element modeling validates their mechanical performance, supporting clinical potential for multi‐tissue regeneration.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, Aveiro, 3810-193, Portugal.
- Institute of Science and Innovation in Mechanical and Industrial Engineering (INEGI), R. Dr. Roberto Frias 400, Porto, 4200-465, Portugal.
ORCID-Profile: João R Maia, Daniel S Fidalgo, Pedro D Rebolo, Ana S Silva, Marco Parente, Rita Sobreiro-Almeida, João F Mano
Förderung
- European Union (EU) Horizon 2020 for the project InterLynk
- Fundação para a Ciência e Tecnologia for the following grants
- CICECO-Aveiro Institute of Materials
Zitieren
APA
Maia, J. R., Bilo, M., Fidalgo, D. S., Rebolo, P. D., Silva, A. S., Parente, M., Sobreiro-Almeida, R., & Mano, J. F. (2026). Natural‐Based Nanocomposite Ink Engineering for Seamless Multi‐Material Integration in Extrusion‐Based 3D Printing. Advanced Healthcare Materials. https://doi.org/10.1002/adhm.202502733
Vancouver
Maia JR, Bilo M, Fidalgo DS, Rebolo PD, Silva AS, Parente M, et al. Natural‐Based Nanocomposite Ink Engineering for Seamless Multi‐Material Integration in Extrusion‐Based 3D Printing. Advanced Healthcare Materials. 2026. doi:10.1002/adhm.202502733
BibTeX
@article{Maia2026,
author = {Maia, João R and Bilo, Miguel and Fidalgo, Daniel S and Rebolo, Pedro D and Silva, Ana S and Parente, Marco and Sobreiro-Almeida, Rita and Mano, João F},
title = {Natural‐Based Nanocomposite Ink Engineering for Seamless Multi‐Material Integration in Extrusion‐Based 3D Printing},
journal = {Advanced Healthcare Materials},
year = {2026},
doi = {10.1002/adhm.202502733}
}
EUVIMED