EUVIMEDEUVIMED entdecken
Crossref

Leveraging the Shape Fidelity of 3D Printed Bone Scaffolds Through Architectural Tailoring of an Emulsion Ink: A Combined Experimental and Computational Analysis

Sagnik Ghosh, Shubham Shankar Mohol, Anupama Datta, Pulak Mohan Pandey, Ritu Kulshreshtha, Bhanu Nandan, Minna Hakkarainen, Rajiv K Srivastava iD

Advanced Healthcare Materials · 2025

DOI: 10.1002/adhm.202404866 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Healthcare Materials, 2025. Verfasst von Sagnik Ghosh und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Textile and Fibre Engineering, Indian Institute of Technology Delhi, Hauz Khas, New Delhi, 110016, India. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Tissue Scaffolds, Bone and Bones, Ink. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 76 Literaturangaben. Gefördert von: Indian Institute of Technology, Delhi, Department of Science and Technology, Ministry of Science and Technology, India.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hierarchical porous, bioactive, and biocompatible scaffolds with customizable multi‐functionality are promising alternatives for autografts and allografts in bone tissue engineering. Combining high internal phase emulsion (HIPE) templating with additive manufacturing provides possibilities to produce such multiscale porous scaffolds. 3D printing of HIPE remains a challenging task due to the intense phase separation under high shear extrusion and reported printability (P r ) of either less than or greater than 1. Tuning viscoelastic properties of emulsion is therefore required to achieve a P r ≈1. This study addresses these issues by preparing Pickering HIPEs using dual networks with synergistic viscous and elastic properties, stabilized by Cloisite 30B interphase. This configuration enhances viscoelasticity and achieves P r values close to 1 (0.98–1.02). The printed scaffolds exhibit trabecular bone‐like, hierarchical interconnected porosity (77%–86%). Computational simulations accurately predict the mechanical, biological, and degradation behavior. Functionalization with Cissus quadrangularis bioactivates the scaffolds, demonstrates in vivo biocompatibility, promotes MC3T3‐E1 adhesion, and proliferation, accelerates osteogenesis, and reduces oxidative stress compared to neat PCL scaffolds. This work introduces a facile strategy for “engineering printability” to produce regenerative materials with hierarchical design and holds the potential for developing optimized bone tissue engineering scaffolds.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalTissue ScaffoldsBone and BonesInkAnimalsMiceEmulsionsTissue EngineeringOsteogenesisPorosityCell ProliferationBiocompatible MaterialsCell Line

Stichwörter der Autor:innen

3D printingbone tissue engineeringhierarchical porous scaffoldhigh internal phase emulsionrheology

Substanzen

EmulsionsBiocompatible Materials

Autor:innen und Institutionen

  • Department of Textile and Fibre Engineering, Indian Institute of Technology Delhi, Hauz Khas, New Delhi, 110016, India.
  • Department of Mechanical Engineering, Indian Institute of Technology Delhi, Hauz Khas, New Delhi, 110016, India.
  • Institute of Nuclear Medicine and Allied Sciences, Defence Research and Development Organization, Brig S. K. Mazumdar Marg, Delhi, 110054, India.
  • Department of Biochemical Engineering and Biotechnology, Indian Institute of Technology Delhi, Hauz Khas, New Delhi, 110016, India.
  • KTH Royal Institute of Technology, Department of Fibre and Polymer Technology, Teknikringen 58, Stockholm, 100 44, Sweden.

ORCID-Profile: Rajiv K Srivastava

Förderung

  • Indian Institute of Technology, Delhi
  • Department of Science and Technology
  • Ministry of Science and Technology, India
  • Central research Facility
  • Department of Science and Technology, Government of Kerala

Zitieren

APA

Ghosh, S., Mohol, S. S., Datta, A., Pandey, P. M., Kulshreshtha, R., Nandan, B., Hakkarainen, M., & Srivastava, R. K. (2025). Leveraging the Shape Fidelity of 3D Printed Bone Scaffolds Through Architectural Tailoring of an Emulsion Ink: A Combined Experimental and Computational Analysis. Advanced Healthcare Materials. https://doi.org/10.1002/adhm.202404866

Vancouver

Ghosh S, Mohol SS, Datta A, Pandey PM, Kulshreshtha R, Nandan B, et al. Leveraging the Shape Fidelity of 3D Printed Bone Scaffolds Through Architectural Tailoring of an Emulsion Ink: A Combined Experimental and Computational Analysis. Advanced Healthcare Materials. 2025. doi:10.1002/adhm.202404866

BibTeX
@article{Ghosh2025,
  author = {Ghosh, Sagnik and Mohol, Shubham Shankar and Datta, Anupama and Pandey, Pulak Mohan and Kulshreshtha, Ritu and Nandan, Bhanu and Hakkarainen, Minna and Srivastava, Rajiv K},
  title = {Leveraging the Shape Fidelity of 3D Printed Bone Scaffolds Through Architectural Tailoring of an Emulsion Ink: A Combined Experimental and Computational Analysis},
  journal = {Advanced Healthcare Materials},
  year = {2025},
  doi = {10.1002/adhm.202404866}
}
Kostenlos starten →