EUVIMEDEUVIMED entdecken
Crossref

Fluoropolymer‐Single Crystal Nanocomposite Based Transducer Fabrication for Bio‐Imaging

Nagendra Singh, S K Biswas iD

Advanced Healthcare Materials · 2025

DOI: 10.1002/adhm.202403711 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Healthcare Materials, 2025. Verfasst von Nagendra Singh und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physical Sciences, Indian Institute of Science Education and Research Mohali, Knowledge City, Sector 81, SAS Nagar, Manauli, 140306, In…. Hauptthemen laut MEDLINE: Nanocomposites, Transducers. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 46 Literaturangaben. Gefördert von: Impacting Research Innovation and Technology, Indian Council of Medical Research.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fluoropolymer alone, as an alternative to lead‐based piezoelectric materials, has shown multiple challenges to develop useful sensors for solving real‐world problems such as photoacoustic, ultrasound pulse echo, and other non‐destructive testing. This work demonstrates the fabrication of high frequency and wide bandwidth transducers with fluoropolymer and highly polarizing cubic single crystal Barium titanate (BaTiO 3 ) ceramic composite for high resolution in‐vivo photo‐acoustic and ultrasound imaging. For transducer fabrication, a customized bio‐compatible nanocomposite sensor film of PVDF‐TrFE (Polyvinylidene fluoride trifluoroethylene)/BaTiO 3 (BTO) is synthesized by drop and dry in heating‐cum‐electro‐poling system for advancing polarization, crystallinity, and higher charge generation. The ratio of nanofiller cubic single crystal BTO and PVDF‐TrFE is optimized using characterization techniques such as FTIR, XRD and electrometer. Thereafter, SEM and TGA analyses are performed to study the surface morphology and thermal stability of the sensing film. Transducers with central frequencies varying from 17 to 42MHz are fabricated and tested for both pulse‐echo mode and receiving photoacoustic signals. These transducers are used for sensing photoacoustic signals generated from hemoglobin and eumelanin and further for ultrasound and photoacoustic imaging. The imaging results are compared with the results obtained using a commercial ultrasound and photoacoustic imaging device. To the best of the knowledge and available literature, for the first time, the fabrication of ultrasound/photoacoustic transducers with cubic single‐crystal nanofiller and fluoropolymer nanocomposite is showed. The detailed transducer fabrication method, characterization results, and imaging of biological tissue using photoacoustic and ultrasound are presented.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

NanocompositesTransducersTitaniumPolyvinylsBarium CompoundsPhotoacoustic TechniquesAnimalsUltrasonographyFluorocarbon Polymers

Stichwörter der Autor:innen

RBC and blood vessel imagingcomposite polymerin‐vivo non‐invasive imagingphotoacoustic microscopyultrasound transducer

Substanzen

TitaniumPolyvinylsBarium Compoundspolyvinylidene fluoridebarium titanate(IV)vinylidene fluoride-trifluoroethylene copolymerFluorocarbon Polymers

Autor:innen und Institutionen

  • Department of Physical Sciences, Indian Institute of Science Education and Research Mohali, Knowledge City, Sector 81, SAS Nagar, Manauli, 140306, India.

ORCID-Profile: S K Biswas

Förderung

  • Impacting Research Innovation and Technology
  • Indian Council of Medical Research

Zitieren

APA

Singh, N., & Biswas, S. K. (2025). Fluoropolymer‐Single Crystal Nanocomposite Based Transducer Fabrication for Bio‐Imaging. Advanced Healthcare Materials. https://doi.org/10.1002/adhm.202403711

Vancouver

Singh N, Biswas SK. Fluoropolymer‐Single Crystal Nanocomposite Based Transducer Fabrication for Bio‐Imaging. Advanced Healthcare Materials. 2025. doi:10.1002/adhm.202403711

BibTeX
@article{Singh2025,
  author = {Singh, Nagendra and Biswas, S K},
  title = {Fluoropolymer‐Single Crystal Nanocomposite Based Transducer Fabrication for Bio‐Imaging},
  journal = {Advanced Healthcare Materials},
  year = {2025},
  doi = {10.1002/adhm.202403711}
}
Kostenlos starten →