Clinically Relevant and Precisely Printable Live Adipose Tissue–Based Bio‐Ink for Volumetric Soft Tissue Reconstruction
Advanced Healthcare Materials · 2025-01 · 14 (1)
DOI: 10.1002/adhm.202402680 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Healthcare Materials, online erschienen am 28.10.2024. Verfasst von Wonwoo Jeong und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, Ulsan National Institute of Science and Technology, 50, UNIST-gil, Ulju-gun, Ulsan, 44919, South Korea. Hauptthemen laut MEDLINE: Adipose Tissue, Printing, Three-Dimensional. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Research Foundation (NRF), Ministry of Science and ICT, South Korea, Nano & Material Technology Development Program, Ministry of Science and ICT, South Korea.
Abstract (Originalsprache)
Autologous fat is widely used in soft tissue reconstruction; however, significant volume reduction owing to necrosis and degradation of the transplanted adipose tissue (AT) remains a major challenge. To address this issue, a novel live AT micro‐fragment–based bio‐ink (ATmf bio‐ink) compatible with precision 3D printing, is developed. Live AT micro‐fragments of ≈280 µm in size are prepared using a custom tissue micronizer and they are incorporated into a fibrinogen/gelatin mixture to create the ATmf bio‐ink. AT micro‐fragments exhibit high viability and preserve the heterogeneous cell population and extracellular matrix of the native AT. The developed bio‐ink enables precise micropatterning and provides an excellent adipo‐inductive microenvironment. AT grafts produced by co‐printing the bio‐ink with polycaprolactone demonstrate a 500% improvement in volume retention and a 300% increase in blood vessel infiltration in vivo compared with conventional microfat grafts. In vivo engraftment of AT grafts is further enhanced by using a stem cell–laden ATmf bio‐ink. Last, it is successfully demonstrated that the bio‐ink is enabled for the creation of clinically relevant and patient‐specific AT grafts for patients undergoing partial mastectomy. This novel ATmf bio‐ink for volumetric soft tissue reconstruction offers a pioneering solution for addressing the limitations of existing clinical techniques.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Biomedical Engineering, Ulsan National Institute of Science and Technology, 50, UNIST-gil, Ulju-gun, Ulsan, 44919, South Korea.
- Wake Forest Institute for Regenerative Medicine, Wake Forest University School of Medicine, Winston-Salem, NC, 27101, USA.
- Department of Bioengineering, Stanford University, Stanford, CA, 94305, USA.
- Wallace H. Coulter Department of Biomedical Engineering, Emory University School of Medicine & Georgia Institute of Technology, Atlanta, GA, 30332, USA.
ORCID-Profile: Wonwoo Jeong, Hyun-Wook Kang
Förderung
- National Research Foundation (NRF), Ministry of Science and ICT, South Korea
- Nano & Material Technology Development Program, Ministry of Science and ICT, South Korea
Zitieren
APA
Jeong, W., Son, J., Choi, J., Han, J., Jeon, S., Kim, M. K., Ha, W., & Kang, H. W. (2025). Clinically Relevant and Precisely Printable Live Adipose Tissue–Based Bio‐Ink for Volumetric Soft Tissue Reconstruction. Advanced Healthcare Materials, 14(1). https://doi.org/10.1002/adhm.202402680
Vancouver
Jeong W, Son J, Choi J, Han J, Jeon S, Kim MK, et al. Clinically Relevant and Precisely Printable Live Adipose Tissue–Based Bio‐Ink for Volumetric Soft Tissue Reconstruction. Advanced Healthcare Materials. 2025;14(1). doi:10.1002/adhm.202402680
BibTeX
@article{Jeong2025,
author = {Jeong, Wonwoo and Son, Jeonghyun and Choi, Jeonghan and Han, Jonghyeuk and Jeon, Seunggyu and Kim, Min Kyeong and Ha, Won and Kang, Hyun-Wook},
title = {Clinically Relevant and Precisely Printable Live Adipose Tissue–Based Bio‐Ink for Volumetric Soft Tissue Reconstruction},
journal = {Advanced Healthcare Materials},
year = {2025},
volume = {14},
number = {1},
doi = {10.1002/adhm.202402680}
}
EUVIMED