EUVIMEDEUVIMED entdecken
Crossref

Liquid‐Phase Integrated 3D Printed Biological Lenses for Lamellar Corneal Substitute

Qian Xue iD, Hanyi Hu, Weiwei Wang, Qi Li, Liang Ma, Jien Ma, Cathy Ye, Huayong Yang, Bin Zhang iD

Advanced Healthcare Materials · 2023-10 · 12 (27)

DOI: 10.1002/adhm.202300600 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Healthcare Materials, online erschienen am 17.09.2023. Verfasst von Qian Xue und 8 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Fluid Power and Mechatronic Systems, School of Mechanical Engineering, Zhejiang University, Hangzhou, 310058, China. Hauptthemen laut MEDLINE: Cornea, Contact Lenses. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 31 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Compared to traditional biological lenses that are used to correct optical systems, such as contact lenses, vision correction surgery, and corneal and lens replacement, 3D printed biological lenses offer a customizable solutions. However, the layer‐by‐layer principle of 3D printing leads to a staircase effect, which cannot meet the critical requirements of surface quality during the manufacturing process of biological lens, particularly with soft materials. Here, a liquid‐phase printing strategy and a surface tension‐dependent (STD) post‐processing method are proposed that use the surface tension of the liquid to reconstruct the air‐liquid interface. This eliminates the staircase effect caused by the stacking of units during 3D printing. The coordinates of integrated printing enable high‐accuracy shape control of soft materials. Using a typical biological lens as an example, this method improves the surface quality of printed lamellar corneal substitutes (LCS) from ±20.0 to ±0.2 µm and reduces thickness feature size from ±500 to ±150 µm. This approach can match human cornea curvature and thickness, achieving ≈85% visible light transmittance and biocompatibility. Liquid‐phase 3D printed biological lenses outperform molded ones in animal experiments. This method can advance artificial biological lens printing research and holds promise for future clinical applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CorneaContact LensesAnimalsHumansPrinting, Three-DimensionalLight

Stichwörter der Autor:innen

3D printingcorneal substitutes

Autor:innen und Institutionen

  • State Key Laboratory of Fluid Power and Mechatronic Systems, School of Mechanical Engineering, Zhejiang University, Hangzhou, 310058, China.
  • Zhejiang University School of Medicine Sir Run Run Shaw Hospital, Hangzhou, 310016, China.
  • School of Medicine, Zhejiang University, Hangzhou, 310058, China.
  • College of Electrical Engineering, Zhejiang University, Hangzhou, 310058, China.
  • Institute of Biomedical Engineering, University of Oxford, Oxford, OX3 7DQ, UK.

ORCID-Profile: Qian Xue, Bin Zhang

Zitieren

APA

Xue, Q., Hu, H., Wang, W., Li, Q., Ma, L., Ma, J., Ye, C., Yang, H., & Zhang, B. (2023). Liquid‐Phase Integrated 3D Printed Biological Lenses for Lamellar Corneal Substitute. Advanced Healthcare Materials, 12(27). https://doi.org/10.1002/adhm.202300600

Vancouver

Xue Q, Hu H, Wang W, Li Q, Ma L, Ma J, et al. Liquid‐Phase Integrated 3D Printed Biological Lenses for Lamellar Corneal Substitute. Advanced Healthcare Materials. 2023;12(27). doi:10.1002/adhm.202300600

BibTeX
@article{Xue2023,
  author = {Xue, Qian and Hu, Hanyi and Wang, Weiwei and Li, Qi and Ma, Liang and Ma, Jien and Ye, Cathy and Yang, Huayong and Zhang, Bin},
  title = {Liquid‐Phase Integrated 3D Printed Biological Lenses for Lamellar Corneal Substitute},
  journal = {Advanced Healthcare Materials},
  year = {2023},
  volume = {12},
  number = {27},
  doi = {10.1002/adhm.202300600}
}
Kostenlos starten →