EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Regeneration of Critical‐Sized Mandibular Defects Using 3D‐Printed Composite Scaffolds: A Quantitative Evaluation of New Bone Formation in In Vivo Studies

Sophia Dalfino iD, Paolo Savadori, Marco Piazzoni iD, Stephen Thaddeus Connelly, Aldo Bruno Giannì, Massimo Del Fabbro, Gianluca Martino Tartaglia, Lorenzo Moroni iD

Advanced Healthcare Materials · 2023-08 · 12 (21)

DOI: 10.1002/adhm.202300128 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Advanced Healthcare Materials, online erschienen am 15.05.2023. Verfasst von Sophia Dalfino und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical, Surgical and Dental Sciences, Università degli Studi di Milano, Milano, 20122, Italy. Hauptthemen laut MEDLINE: Tissue Scaffolds, Osteogenesis. Die Arbeit wurde bisher 48-mal zitiert (Crossref) und nennt 107 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mandibular tissue engineering aims to develop synthetic substitutes for the regeneration of critical size defects (CSD) caused by a variety of events, including tumor surgery and post‐traumatic resections. Currently, the gold standard clinical treatment of mandibular resections (i.e., autologous fibular flap) has many drawbacks, driving research efforts toward scaffold design and fabrication by additive manufacturing (AM) techniques. Once implanted, the scaffold acts as a support for native tissue and facilitates processes that contribute to its regeneration, such as cells infiltration, matrix deposition and angiogenesis. However, to fulfil these functions, scaffolds must provide bioactivity by mimicking natural properties of the mandible in terms of structure, composition and mechanical behavior. This review aims to present the state of the art of scaffolds made with AM techniques that are specifically employed in mandibular tissue engineering applications. Biomaterials chemical composition and scaffold structural properties are deeply discussed, along with strategies to promote osteogenesis (i.e., delivery of biomolecules, incorporation of stem cells, and approaches to induce vascularization in the constructs). Finally, a comparison of in vivo studies is made by taking into consideration the amount of new bone formation (NB), the CSD dimensions, and the animal model.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Tissue ScaffoldsOsteogenesisAnimalsPrinting, Three-DimensionalBiocompatible MaterialsTissue EngineeringMandibleBone Regeneration

Stichwörter der Autor:innen

3D printingbone tissue engineeringcompositesmandiblesmaxillofacial defectspolymers

Substanzen

Biocompatible Materials

Autor:innen und Institutionen

  • Department of Biomedical, Surgical and Dental Sciences, Università degli Studi di Milano, Milano, 20122, Italy.
  • Complex Tissue Regeneration Department, MERLN Institute for Technology Inspired Regenerative Medicine, Maastricht, 6229 ER, The Netherlands.
  • Fondazione IRCCS Ca' Granda, Ospedale Maggiore Policlinico, Milano, 20122, Italy.
  • Department of Physics, Università degli Studi di Milano, Milano, 20133, Italy.
  • Department of Oral & Maxillofacial Surgery, University of California San Francisco, 4150 Clement St, San Francisco, CA, 94121, USA.

ORCID-Profile: Sophia Dalfino, Marco Piazzoni, Lorenzo Moroni

Zitieren

APA

Dalfino, S., Savadori, P., Piazzoni, M., Connelly, S. T., Giannì, A. B., Del Fabbro, M., Tartaglia, G. M., & Moroni, L. (2023). Regeneration of Critical‐Sized Mandibular Defects Using 3D‐Printed Composite Scaffolds: A Quantitative Evaluation of New Bone Formation in In Vivo Studies. Advanced Healthcare Materials, 12(21). https://doi.org/10.1002/adhm.202300128

Vancouver

Dalfino S, Savadori P, Piazzoni M, Connelly ST, Giannì AB, Del Fabbro M, et al. Regeneration of Critical‐Sized Mandibular Defects Using 3D‐Printed Composite Scaffolds: A Quantitative Evaluation of New Bone Formation in In Vivo Studies. Advanced Healthcare Materials. 2023;12(21). doi:10.1002/adhm.202300128

BibTeX
@article{Dalfino2023,
  author = {Dalfino, Sophia and Savadori, Paolo and Piazzoni, Marco and Connelly, Stephen Thaddeus and Giannì, Aldo Bruno and Del Fabbro, Massimo and Tartaglia, Gianluca Martino and Moroni, Lorenzo},
  title = {Regeneration of Critical‐Sized Mandibular Defects Using 3D‐Printed Composite Scaffolds: A Quantitative Evaluation of New Bone Formation in In Vivo Studies},
  journal = {Advanced Healthcare Materials},
  year = {2023},
  volume = {12},
  number = {21},
  doi = {10.1002/adhm.202300128}
}
Kostenlos starten →