Polyurethane Hot‐Melt Adhesives with Dynamic Covalent Crosslinks for Balanced Processability and Adhesion
Advanced Functional Materials · 17.11.2026
DOI: 10.1002/adfm.79688 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 17.11.2026. Verfasst von Zijin Wang und 10 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Polyurethane hot‐melt adhesives (PU‐HMAs) are widely used, yet face a long‐standing trade‐off between low viscosity required for effective interfacial establishment and high crosslink density necessary for mechanical robustness and environmental durability. Here, a series of solvent‐free, dynamically crosslinked polyurethane networks containing different amounts of tri‐HDI‐derived trifunctional units were constructed by end‐capping the polyurethane chains with monofunctional furan units and introducing BMI to form reversible Diels–Alder bonds. Systematic variation of the tri‐HDI/MDI composition resulted in nonmonotonic changes in processing‐state viscosity, bulk mechanical properties, and adhesive performance, enabling the identification of an optimized formulation. At elevated temperatures, partial network dissociation increases molecular mobility and reduces viscosity, promoting infiltration‐assisted anchoring in porous substrates such as wood, as well as surface wetting and intimate contact on dense substrates. Upon cooling and subsequent conditioning, network reconstitution restores cohesive strength and reinforces the established interface. Consequently, the optimized formulation, DAPU‐2, exhibits a complex viscosity of 17.85 Pa·s at 130°C and a lap‐shear strength of 15.68 ± 1.27 MPa on stainless steel after seven days. By coordinating formulation control, dynamic covalent chemistry, interfacial transport, and network reconstitution, this work provides a practical design approach for high‐performance and reprocessable PU‐HMAs.
Förderung
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Wang, Z., Wang, Y., Li, Z., Shi, A., Zhao, X., Qian, B., Mohammadalipour, M., Chen, H., Guan, Y., Sun, W., & You, Z. (2026). Polyurethane Hot‐Melt Adhesives with Dynamic Covalent Crosslinks for Balanced Processability and Adhesion. Advanced Functional Materials. https://doi.org/10.1002/adfm.79688
Vancouver
Wang Z, Wang Y, Li Z, Shi A, Zhao X, Qian B, et al. Polyurethane Hot‐Melt Adhesives with Dynamic Covalent Crosslinks for Balanced Processability and Adhesion. Advanced Functional Materials. 2026. doi:10.1002/adfm.79688
BibTeX
@article{Wang2026,
author = {Wang, Zijin and Wang, Yuepeng and Li, Zihao and Shi, Anqi and Zhao, Xiaojuan and Qian, Bo and Mohammadalipour, Mohammad and Chen, Hailiang and Guan, Yong and Sun, Wei and You, Zhengwei},
title = {Polyurethane Hot‐Melt Adhesives with Dynamic Covalent Crosslinks for Balanced Processability and Adhesion},
journal = {Advanced Functional Materials},
year = {2026},
doi = {10.1002/adfm.79688}
}
EUVIMED