EUVIMEDEUVIMED entdecken
Crossref

Activating Selenium for Atomic‐Level Defect Passivation and Band Engineering Enables High‐Efficiency Bulk Heterojunction CuInS 2 Solar Cells

Junwei Chen, Congrui Liu, Chengwu Ruan, Chenlong Gao, Yichao Wang, Pengfei Wang, Zhihui Yang, Fang Wu, Yan Zhang, Jun Xu, Rongfeng Tang

Advanced Functional Materials · 04.11.2026

DOI: 10.1002/adfm.79456 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 04.11.2026. Verfasst von Junwei Chen und 10 weiteren Autor:innen. Die Arbeit nennt 49 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Copper indium sulfide (CuInS 2 ) stands out as a promising candidate for next‐generation photovoltaics due to its exceptional stability, high absorption coefficient, and eco‐friendly composition. However, realizing high‐quality CuInS 2 absorbers typically demands high‐temperature processing, which not only limits substrate compatibility but also invites interfacial degradation from elemental interdiffusion. Here, we overcome this challenge by introducing a low‐temperature selenium ion activation (LTSA) strategy that enables near‑surface atomic‑level defect passivation and band‑structure modulation in solution‐processed CuInS 2 absorbers. Beyond conventional passivation, LTSA orchestrates three synergistic effects: (i) selenium ion diffusion tailors a favorable band alignment; (ii) atomic substitution effectively passivates critical deep‐level defects (such as In Cu and V S ) through robust chemical bonding; and (iii) interfacial charge transport is markedly enhanced while carrier recombination is suppressed. These combined benefits yield CuInS 2 solar cells on transparent conducting oxide substrates with a record‐competitive power conversion efficiency of 11.43% and the highest fill factor of 66.88% reported to date. By establishing LTSA as a low‐temperature route for near‑surface atomic‐level defect passivation and structural reconstruction, this work unlocks new pathways toward high‐performance, cost‐effective inorganic photovoltaics.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Chen, J., Liu, C., Ruan, C., Gao, C., Wang, Y., Wang, P., Yang, Z., Wu, F., Zhang, Y., Xu, J., & Tang, R. (2026). Activating Selenium for Atomic‐Level Defect Passivation and Band Engineering Enables High‐Efficiency Bulk Heterojunction CuInS 2 Solar Cells. Advanced Functional Materials. https://doi.org/10.1002/adfm.79456

Vancouver

Chen J, Liu C, Ruan C, Gao C, Wang Y, Wang P, et al. Activating Selenium for Atomic‐Level Defect Passivation and Band Engineering Enables High‐Efficiency Bulk Heterojunction CuInS 2 Solar Cells. Advanced Functional Materials. 2026. doi:10.1002/adfm.79456

BibTeX
@article{Chen2026,
  author = {Chen, Junwei and Liu, Congrui and Ruan, Chengwu and Gao, Chenlong and Wang, Yichao and Wang, Pengfei and Yang, Zhihui and Wu, Fang and Zhang, Yan and Xu, Jun and Tang, Rongfeng},
  title = {Activating Selenium for Atomic‐Level Defect Passivation and Band Engineering Enables High‐Efficiency Bulk Heterojunction CuInS 2 Solar Cells},
  journal = {Advanced Functional Materials},
  year = {2026},
  doi = {10.1002/adfm.79456}
}
Kostenlos starten →