EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Highly Efficient and Stable Roll‐to‐Roll Coated Perovskite Solar Cells Enabled by Antisolvent Vapor‐Assisted Crystallization

Narendra Pai, Andrew D. Scully, Yogesh Gulia, Aaron Seeber, Jueng‐Eun Kim, Luke J. Sutherland, Doojin Vak, Jacob Yin, Mark Greaves, Malisja de Vries, Mei Gao, Dechan Angmo

Advanced Functional Materials · 04.11.2026

DOI: 10.1002/adfm.79444 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 04.11.2026. Verfasst von Narendra Pai und 11 weiteren Autor:innen. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A key challenge in roll‐to‐roll (R2R) perovskite solar cell (PSC) manufacturing is translating crystallization‐control methods developed for laboratory‐scale spin coating to scalable processes. Liquid antisolvent baths suffer from process drift due to contamination and generate substantial solvent waste, while gas‐assisted quenching induces rapid nucleation with limited control over grain growth. Here, antisolvent vapor‐assisted crystallization (AVAC) is demonstrated as a scalable strategy for controlling perovskite crystallization during R2R slot‐die coating under ambient conditions. By regulating antisolvent vapor partial pressure within the coating zone, AVAC controls host‐solvent extraction, limits moisture exposure, and promotes grain growth. One‐step R2R coating of Cs 0 . 12 FA 0 . 88 PbI 3 films using AVAC produces pinhole‐free, α‐phase films with grain sizes exceeding 500 nm. Corresponding PSCs with evaporated gold electrodes achieve champion power conversion efficiencies (PCEs) of 18.3%, and 15.2% for fully R2R‐processed PSCs with a carbon electrode. The latter retain 97% of their initial PCE after more than 550 h of maximum power point tracking under 1000 W m − 2 illumination in an inert atmosphere at 38°C ± 2°C and < 1% relative humidity. This performance ranks among the highest reported for R2R‐processed PSCs. Technical challenges associated with antisolvent properties for AVAC are discussed and suitable candidates for R2R manufacturing are identified.

Zitieren

APA

Pai, N., Scully, A. D., Gulia, Y., Seeber, A., Kim, J., Sutherland, L. J., Vak, D., Yin, J., Greaves, M., Vries, M. D., Gao, M., & Angmo, D. (2026). Highly Efficient and Stable Roll‐to‐Roll Coated Perovskite Solar Cells Enabled by Antisolvent Vapor‐Assisted Crystallization. Advanced Functional Materials. https://doi.org/10.1002/adfm.79444

Vancouver

Pai N, Scully AD, Gulia Y, Seeber A, Kim J, Sutherland LJ, et al. Highly Efficient and Stable Roll‐to‐Roll Coated Perovskite Solar Cells Enabled by Antisolvent Vapor‐Assisted Crystallization. Advanced Functional Materials. 2026. doi:10.1002/adfm.79444

BibTeX
@article{Pai2026,
  author = {Pai, Narendra and Scully, Andrew D. and Gulia, Yogesh and Seeber, Aaron and Kim, Jueng‐Eun and Sutherland, Luke J. and Vak, Doojin and Yin, Jacob and Greaves, Mark and Vries, Malisja de and Gao, Mei and Angmo, Dechan},
  title = {Highly Efficient and Stable Roll‐to‐Roll Coated Perovskite Solar Cells Enabled by Antisolvent Vapor‐Assisted Crystallization},
  journal = {Advanced Functional Materials},
  year = {2026},
  doi = {10.1002/adfm.79444}
}
Kostenlos starten →