Defect‐Free Transfer Principles for Scalable, Thin Garnet‐Based Hybrid Solid Electrolytes in Solid‐State Batteries
Advanced Functional Materials · 2026-11 · 36 (89)
DOI: 10.1002/adfm.78679 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 25.09.2026. Verfasst von Seul Gi Chu und 8 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Research Council of Science and Technology.
Abstract (Originalsprache)
The scalable fabrication of thin, uniform, and defect‐free hybrid solid electrolytes (HSEs) remains a critical challenge for solid‐state batteries due to the lack of quantitative design principles governing interfacial interactions during coating, transfer, and impregnation. Here, we establish thermodynamic criteria for Li 6 . 75 La 3 Zr 1 . 75 Ta 0 . 25 O 12 ‐based hybrid layers (LLZTO‐HLs) fabrication using Hansen solubility parameters to correlate interfacial compatibility with process behavior. Uniform coating requires sufficiently high slurry–substrate compatibility, whereas clean transfer demands low binder–substrate adhesion. Furthermore, binder–polymer electrolyte compatibility governs impregnation behavior, enabling rational combination selection. Based on this framework, defect‐free, 15 µm‐thin LLZTO‐HLs are fabricated over large areas (120 cm 2 ) via transfer printing and integrated into transfer‐printed HSEs (THSEs). Compared with direct coating, transfer printing enables uniform electrolyte layers and electrode interfacial stability owing to the absence of slurry infiltration into the porous anode. Consequently, THSEs exhibit enhanced Li + transport, superior rate capability, and improved cycling stability in coin‐type hybrid solid‐state batteries. Notably, comparable cycling performance is retained in pouch‐type cells despite increased cell area, highlighting the excellent uniformity and scalability of the THSE. The THSE demonstrates superior thermal stability under elevated temperatures. The thermodynamic design principles established herein provide a generalizable framework for scalable manufacturing of high‐performance HSEs.
Förderung
- National Research Council of Science and Technology
Zitieren
APA
Chu, S. G., Lee, M. H., Suk, J., Song, S., Ryu, H. M., Kang, H., Han, J., Park, M., & Kang, Y. (2026). Defect‐Free Transfer Principles for Scalable, Thin Garnet‐Based Hybrid Solid Electrolytes in Solid‐State Batteries. Advanced Functional Materials, 36(89). https://doi.org/10.1002/adfm.78679
Vancouver
Chu SG, Lee MH, Suk J, Song S, Ryu HM, Kang H, et al. Defect‐Free Transfer Principles for Scalable, Thin Garnet‐Based Hybrid Solid Electrolytes in Solid‐State Batteries. Advanced Functional Materials. 2026;36(89). doi:10.1002/adfm.78679
BibTeX
@article{Chu2026,
author = {Chu, Seul Gi and Lee, Myeong Hwan and Suk, Jungdon and Song, Seung‐Wan and Ryu, Hye Min and Kang, Halim and Han, Jusung and Park, Myung‐Soo and Kang, Yongku},
title = {Defect‐Free Transfer Principles for Scalable, Thin Garnet‐Based Hybrid Solid Electrolytes in Solid‐State Batteries},
journal = {Advanced Functional Materials},
year = {2026},
volume = {36},
number = {89},
doi = {10.1002/adfm.78679}
}
EUVIMED