Melt‐Processable Perovskite Semiconductors for Sensitive x‐ray Detection
Advanced Functional Materials · 2026-06 · 36 (44)
DOI: 10.1002/adfm.75149 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 26.03.2026. Verfasst von Changyao Zhou und 6 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 53 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Metal halide perovskite x‐ray detectors are currently garnering significant research attention due to their ability to effectively detect x‐ray radiation with a low threshold. However, their practical development is impeded by challenges in fabricating high‐quality crystalline perovskite films with several hundred micrometers thick over a large area. Herein, we report a novel meltable 2D Ruddlesden‐Popper perovskite that features a low melting point of 122°C and a decomposition temperature of 240°C, offering an ideal process window for melt‐casting. Then, ∼500‐µm‐thick, dense, and uniform perovskite films with high electronic quality over large areas were fabricated by a low‐temperature melt‐casting approach. This enabled us to fabricate direct‐conversion x‐ray detectors with a sensitivity of ∼1500 µC Gy air −1 cm −2 and a detection limit of ∼40 nGy air s −1 . The strong interfacial adhesion between perovskite and substrate can withstand a tensile stress of 6.24 × 10 5 Pa without detachment, endowing a superior mechanical reliability. Finally, imaging devices integrated with thin‐film transistor (TFT) demonstrated excellent imaging capability, highlighting the practical applicability of this material system.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Zhou, C., Yuan, R., Zhang, M., Tian, W., Lu, X., Fan, Z., & Zheng, X. (2026). Melt‐Processable Perovskite Semiconductors for Sensitive x‐ray Detection. Advanced Functional Materials, 36(44). https://doi.org/10.1002/adfm.75149
Vancouver
Zhou C, Yuan R, Zhang M, Tian W, Lu X, Fan Z, et al. Melt‐Processable Perovskite Semiconductors for Sensitive x‐ray Detection. Advanced Functional Materials. 2026;36(44). doi:10.1002/adfm.75149
BibTeX
@article{Zhou2026,
author = {Zhou, Changyao and Yuan, Ruihan and Zhang, Min and Tian, Wanjia and Lu, Xiaojuan and Fan, Zhenghui and Zheng, Xiaojia},
title = {Melt‐Processable Perovskite Semiconductors for Sensitive x‐ray Detection},
journal = {Advanced Functional Materials},
year = {2026},
volume = {36},
number = {44},
doi = {10.1002/adfm.75149}
}
EUVIMED