EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dispensing Volumetric Additive Manufacturing

Hongryung Jeon, Yunsoo Lee, Seobin Park, Kyung‐Hwan Kim, Junyoung Seo, Im Doo Jung

Advanced Functional Materials · 2026-06 · 36 (44)

DOI: 10.1002/adfm.202531982 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 21.03.2026. Verfasst von Hongryung Jeon und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Despite the advantages of additive manufacturing (AM) in creating customized 3D shapes, conventional layer‐by‐layer approaches are limited by low production rates, restricting their broader applications. Volumetric additive manufacturing (VAM) has emerged as a promising technique, enabling the simultaneous photopolymerization of entire volumes, which significantly reduces fabrication time. However, current computed axial lithography requires manual operations per print cycle, such as loading resin into a vial, physically placing and aligning the vial (with or without an index‐matching medium), and removing the printed object, limiting continuous, high‐throughput production of multiple parts. Here, we propose a dispensing volumetric additive manufacturing (DVAM) method that prints and dispenses each part within a droplet in less than a minute. The printing process occurs within a single droplet dispensed from a glass pipette, enabling simultaneous printed object removal and resin replenishment in a second. Light pattern distortion caused by the absence of the index‐matching fluid was corrected through real‐time droplet profile estimation and inverse ray‐tracing within the optical system. We demonstrate rapid serial VAM of 10 different objects within 10 min. This approach establishes a practical pathway toward scalable, high‐throughput volumetric manufacturing, enabling rapid production of complex 3D structures without the operational bottlenecks of conventional VAM workflows.

Zitieren

APA

Jeon, H., Lee, Y., Park, S., Kim, K., Seo, J., & Jung, I. D. (2026). Dispensing Volumetric Additive Manufacturing. Advanced Functional Materials, 36(44). https://doi.org/10.1002/adfm.202531982

Vancouver

Jeon H, Lee Y, Park S, Kim K, Seo J, Jung ID. Dispensing Volumetric Additive Manufacturing. Advanced Functional Materials. 2026;36(44). doi:10.1002/adfm.202531982

BibTeX
@article{Jeon2026,
  author = {Jeon, Hongryung and Lee, Yunsoo and Park, Seobin and Kim, Kyung‐Hwan and Seo, Junyoung and Jung, Im Doo},
  title = {Dispensing Volumetric Additive Manufacturing},
  journal = {Advanced Functional Materials},
  year = {2026},
  volume = {36},
  number = {44},
  doi = {10.1002/adfm.202531982}
}
Kostenlos starten →