EUVIMEDEUVIMED entdecken
Crossref

Grain Boundary and Interface Engineering Enables Thermally Stable PbS Nanocomposites for High‐Performance Thermoelectric Devices

Lixiang Xu, Lulu Huang, Weite Meng, Chenxin Wang, Shaoqing Lu, Shanhong Wan, Mengyao Li, Xuan Yang, Qingyue Wang, Wen‐Jun Wang, Andreu Cabot, Yu Zhang und 2 weitere

Advanced Functional Materials · 2026-03 · 36 (26)

DOI: 10.1002/adfm.202528614 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 22.12.2025. Verfasst von Lixiang Xu und 13 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 82 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lead sulfide (PbS) is an earth‐abundant thermoelectric (TE) material. Cu, despite being an effective dopant, becomes thermally mobile at elevated temperatures, causing interfacial reactions and compositional inhomogeneity that undermine structural and electronic stability. In this study, we report a composite route that integrates colloidal PbS nanocrystals (NCs) with aqueous‐synthesized Cu‐doped PbS NCs to form PbS‐based nanocomposites. The approach integrates high Cu‐doping efficiency in aqueous synthesized NCs and structural robustness of colloidal NCs, thereby suppressing Cu migration at elevated temperature and improving thermal stability and mechanical robustness. The microstructure yields dense grain boundaries and heterointerfaces, where traces amount of Cu 2 S nanodomains are present, thereby modulating carrier concentration while enhancing phonon scattering. The nanocomposites exhibit 37% increase in mechanical strength, superior thermal stability over consecutive heating‐cooling cycles and prolonged isothermal test, and reduced lattice thermal conductivity of 0.63 W m −1 K −1 , resulting in a peak zT of ∼1.1 at 790 K. Furthermore, a single‐leg TE device fabricated from the optimized composite achieves a conversion efficiency of 6.3% at ΔT = 449 K, exceeding that of most PbS‐based counterparts operating at similar temperatures. This study demonstrates a microstructure and defect‐engineering that balances efficiency with long‐term service reliability for PbS‐based TEs.

Zitieren

APA

Xu, L., Huang, L., Meng, W., Wang, C., Lu, S., Wan, S., Li, M., Yang, X., Wang, Q., Wang, W., Cabot, A., Zhang, Y., Liu, Y., & Lim, K. H. (2026). Grain Boundary and Interface Engineering Enables Thermally Stable PbS Nanocomposites for High‐Performance Thermoelectric Devices. Advanced Functional Materials, 36(26). https://doi.org/10.1002/adfm.202528614

Vancouver

Xu L, Huang L, Meng W, Wang C, Lu S, Wan S, et al. Grain Boundary and Interface Engineering Enables Thermally Stable PbS Nanocomposites for High‐Performance Thermoelectric Devices. Advanced Functional Materials. 2026;36(26). doi:10.1002/adfm.202528614

BibTeX
@article{Xu2026,
  author = {Xu, Lixiang and Huang, Lulu and Meng, Weite and Wang, Chenxin and Lu, Shaoqing and Wan, Shanhong and Li, Mengyao and Yang, Xuan and Wang, Qingyue and Wang, Wen‐Jun and Cabot, Andreu and Zhang, Yu and Liu, Yu and Lim, Khak Ho},
  title = {Grain Boundary and Interface Engineering Enables Thermally Stable PbS Nanocomposites for High‐Performance Thermoelectric Devices},
  journal = {Advanced Functional Materials},
  year = {2026},
  volume = {36},
  number = {26},
  doi = {10.1002/adfm.202528614}
}
Kostenlos starten →