Ultra‐Stable Polycarbonate‐Based Solid‐State Lithium Metal Batteries Enabled by In Situ Polymerized Ferroelectric Engineering
Advanced Functional Materials · 2026-04 · 36 (30)
DOI: 10.1002/adfm.202527353 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 14.12.2025. Verfasst von Zhihui Jia und 11 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 55 Literaturangaben. Gefördert von: National Key Research and Development Program of China, Natural Science Foundation of Henan Province, National Major Science and Technology Projects of China.
Abstract (Originalsprache)
The relatively low room‐temperature ionic conductivity and terrible lithium dendrite growth of polycarbonate‐based solid polymer electrolytes (SPEs) seriously restrict their further development for solid‐state lithium metal batteries (SSLMBs). Herein, a polycarbonate‐based SPE is innovatively designed through facile in situ polymerization of ferroelectric poly(vinylidene fluoride‐trifluoroethylene‐chlorotrifluoroethylene) (PVTC) and vinyl ethylene carbonate (VEC) monomer (PVTC‐g‐PVEC). This in situ polymerized PVTC‐g‐PVEC SPE with polar ─CF 2 group and C═O/C─O groups greatly promotes the dissociation of Li salts and enhances the transport of Li + . Moreover, the ferroelectric PVTC‐g‐PVEC SPE can produce spontaneous polarization under external electric fields, which promotes uniform deposition of Li + and suppresses lithium dendrite growth. In addition, the fabricated PVTC‐g‐PVEC SPE facilitates the formation of a stable solid electrolyte interface and cathode electrolyte interface, effectively reducing side reactions at the electrode/electrolyte interfaces. Specifically, the Li|PVTC‐g‐PVEC|Li symmetric cell can exhibit ultra‐long cycle stability for more than 10 000 h (>416 days). The assembled LiFePO 4 |PVTC‐g‐PVEC|Li cell and high‐voltage LiNi 0.8 Co 0.1 Mo 0.1 O 2 |PVTC‐g‐PVEC|Li cell exhibit outstanding cycling stability for 1000 cycles at 2C and 500 cycles at 1C, respectively. The pouch batteries also depict high safety against abusive conditions. This in situ polymerized ferroelectric engineering strategy establishes a new pathway for designing high‐performance solid‐state lithium batteries.
Förderung
- National Key Research and Development Program of China
- Natural Science Foundation of Henan Province
- National Major Science and Technology Projects of China
Zitieren
APA
Jia, Z., Wang, F., Ren, J., Zhu, J., Li, H., Liang, Y., An, X., Liu, X., Sun, X., Wang, X., He, Y., & Liu, Y. (2026). Ultra‐Stable Polycarbonate‐Based Solid‐State Lithium Metal Batteries Enabled by In Situ Polymerized Ferroelectric Engineering. Advanced Functional Materials, 36(30). https://doi.org/10.1002/adfm.202527353
Vancouver
Jia Z, Wang F, Ren J, Zhu J, Li H, Liang Y, et al. Ultra‐Stable Polycarbonate‐Based Solid‐State Lithium Metal Batteries Enabled by In Situ Polymerized Ferroelectric Engineering. Advanced Functional Materials. 2026;36(30). doi:10.1002/adfm.202527353
BibTeX
@article{Jia2026,
author = {Jia, Zhihui and Wang, Fei and Ren, Jiangzhuo and Zhu, Jiacheng and Li, Haoming and Liang, Yanfang and An, Xufei and Liu, Xianming and Sun, Xiaobin and Wang, Xuefeng and He, Yan‐Bing and Liu, Yong},
title = {Ultra‐Stable Polycarbonate‐Based Solid‐State Lithium Metal Batteries Enabled by In Situ Polymerized Ferroelectric Engineering},
journal = {Advanced Functional Materials},
year = {2026},
volume = {36},
number = {30},
doi = {10.1002/adfm.202527353}
}
EUVIMED