EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Photoconductivity‐Driven Quantum Efficiency Gain in Inorganic Ruddlesden‐Popper Layered Cs 2 PbBr 2 I 2 Perovskite Photodetector for Visible Light Detection

Md Fahim Al Fattah, Asif Abdullah Khan, Saikiran Khamgaonkar, Majid Haji Bagheri, Danyah Khan, Md Rasidul Islam, Mahmoud Almadoun, Aixi Pan, Alexander Li, Marwa Abd‐Ellah, Vivek Maheshwari, Dayan Ban

Advanced Functional Materials · 2026-04 · 36 (33)

DOI: 10.1002/adfm.202522928 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 10.01.2026. Verfasst von Md Fahim Al Fattah und 11 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada, University of Waterloo, Canada Foundation for Innovation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the continuous drive for miniaturizing optoelectronic devices, 2D layered halide perovskites have been intensively studied in photo‐electric conversion for their superior stability and remarkable performance even at their atomically thin structure. Although UV sensing is reported, its deployment in visible light detection is yet to be realized. We use a rational halogen mixing strategy to first report an experimental visible light photodetector of Cs 2 PbBr 2 I 2 with a bandgap of 1.96 eV. Through a rigorous experimental investigation in conjunction with computational modeling, we achieve a high‐quality active layer with large grains and small trap density yielding extraordinary performance. We observe a high quantum efficiency in our vertical photodetector (VPD) owing to trap‐mediated persistent photoconductivity (PPC). Our optoelectronic analysis reveals that bulk trap states are responsible for the observed EQE gain, which retard electrons transit time by trap/de‐trap process while multiple holes are extracted to the external circuit. The device exhibits an external quantum efficiency exceeding 200%, a responsivity of 830 mA W −1 at 488 nm, and an on/off ratio approaching 10 5 . This gain strategy exploiting the trap‐assisted carrier delay coupled with the light‐induced electric field could be a potential approach for next‐generation, energy‐efficient, self‐powered photodetectors.

Förderung

  • Natural Sciences and Engineering Research Council of Canada
  • University of Waterloo
  • Canada Foundation for Innovation

Zitieren

APA

Fattah, M. F. A., Khan, A. A., Khamgaonkar, S., Bagheri, M. H., Khan, D., Islam, M. R., Almadoun, M., Pan, A., Li, A., Abd‐Ellah, M., Maheshwari, V., & Ban, D. (2026). Photoconductivity‐Driven Quantum Efficiency Gain in Inorganic Ruddlesden‐Popper Layered Cs 2 PbBr 2 I 2 Perovskite Photodetector for Visible Light Detection. Advanced Functional Materials, 36(33). https://doi.org/10.1002/adfm.202522928

Vancouver

Fattah MFA, Khan AA, Khamgaonkar S, Bagheri MH, Khan D, Islam MR, et al. Photoconductivity‐Driven Quantum Efficiency Gain in Inorganic Ruddlesden‐Popper Layered Cs 2 PbBr 2 I 2 Perovskite Photodetector for Visible Light Detection. Advanced Functional Materials. 2026;36(33). doi:10.1002/adfm.202522928

BibTeX
@article{Fattah2026,
  author = {Fattah, Md Fahim Al and Khan, Asif Abdullah and Khamgaonkar, Saikiran and Bagheri, Majid Haji and Khan, Danyah and Islam, Md Rasidul and Almadoun, Mahmoud and Pan, Aixi and Li, Alexander and Abd‐Ellah, Marwa and Maheshwari, Vivek and Ban, Dayan},
  title = {Photoconductivity‐Driven Quantum Efficiency Gain in Inorganic Ruddlesden‐Popper Layered Cs 2 PbBr 2 I 2 Perovskite Photodetector for Visible Light Detection},
  journal = {Advanced Functional Materials},
  year = {2026},
  volume = {36},
  number = {33},
  doi = {10.1002/adfm.202522928}
}
Kostenlos starten →