EUVIMEDEUVIMED entdecken
Crossref

MXene‐Controlled PTFE Release for Ultra‐Low Friction PEEK Composites

Cheng‐Feng Du, Lili Xue, Mengzhao Wang, Mingyu Fu, Ruoyu Wu, Shiyao Lei, Weihong Qi, Conghui Meng, Hong Yu, Xuqing Liu

Advanced Functional Materials · 2026-02 · 36 (14)

DOI: 10.1002/adfm.202520137 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 20.09.2025. Verfasst von Cheng‐Feng Du und 9 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 84 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Aeronautical Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Poly(ether‐ether‐ketone) (PEEK) is a key structural material in lightweight robots, yet its poor self‐lubricity limits use in moving components. This study develops PEEK‐based composites incorporating poly(tetra‐fluoroethylene) (PTFE) as the lubricating phase and Ti 3 C 2 T x MXene as transfer film mediator is designed and fabricated via hot‐press sintering. Their mechanical properties are studied via a compressive test, and their tribological performances are probed upon sliding against the ZrO 2 ball with a linear reciprocating ball‐on‐plane configuration. By synergistically regulating the content of PTFE and MXene, the threshold content of PTFE and MXene for achieving an ultra‐low friction can be obtained, which strengthens the composites and thus contributes to ultra‐low wear. At an optimal PTFE content of 10 wt.%, MXene addition doubles the engineering strain, accompanied by an 11% increase in compressive strength. Meanwhile, the increased content of Ti 3 C 2 T x continuously reduces the coefficient of friction to 0.060 ± 0.001, which is 26.83% lower than that of the composite without MXene, while keeping the wear rate at a low level of 10 −6 mm 3 N −1 ·m −1 . According to the molecular dynamics simulation, the excellent anti‐friction and anti‐wear performance can be attributed to the controlled release of PTFE by Ti 3 C 2 T x MXene, which originates from their strong interfacial bonding.

Förderung

  • National Natural Science Foundation of China
  • Aeronautical Science Foundation of China

Zitieren

APA

Du, C., Xue, L., Wang, M., Fu, M., Wu, R., Lei, S., Qi, W., Meng, C., Yu, H., & Liu, X. (2026). MXene‐Controlled PTFE Release for Ultra‐Low Friction PEEK Composites. Advanced Functional Materials, 36(14). https://doi.org/10.1002/adfm.202520137

Vancouver

Du C, Xue L, Wang M, Fu M, Wu R, Lei S, et al. MXene‐Controlled PTFE Release for Ultra‐Low Friction PEEK Composites. Advanced Functional Materials. 2026;36(14). doi:10.1002/adfm.202520137

BibTeX
@article{Du2026,
  author = {Du, Cheng‐Feng and Xue, Lili and Wang, Mengzhao and Fu, Mingyu and Wu, Ruoyu and Lei, Shiyao and Qi, Weihong and Meng, Conghui and Yu, Hong and Liu, Xuqing},
  title = {MXene‐Controlled PTFE Release for Ultra‐Low Friction PEEK Composites},
  journal = {Advanced Functional Materials},
  year = {2026},
  volume = {36},
  number = {14},
  doi = {10.1002/adfm.202520137}
}
Kostenlos starten →