EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Strain‐Activated Photo‐Dehalogenation Unlocks Low‐Energy One and Two‐Photon 3D Microfabrication

Kacper Piskorz, Katarzyna Starzak, Malgorzata Noworyta, Konrad Cyprych, Krzysztof Bartkowski, Zahra Badri, Sukhvinder Dhiman, Cina Foroutan‐Nejad, Jaroslaw Mysliwiec, Marcin Lindner, Joanna Ortyl

Advanced Functional Materials · 2026-02 · 36 (13)

DOI: 10.1002/adfm.202516241 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 21.09.2025. Verfasst von Kacper Piskorz und 10 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Narodowa Agencja Wymiany Akademickiej, Agencja Badań Medycznych, Academic Computer Centre Cyfronet, AGH University of Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Light‐induced photopolymerization is a sustainable and powerful engine in additive manufacturing for semiconductors, microelectronics, and optical devices. However, the field remains constrained by the limited availability of photoinitiators (PIs) that operate efficiently across the visible to near‐infrared (NIR) spectrum and support both one‐photon (1PP) and two‐photon (2PP) processes. Herein, we introduce a new paradigm for PI design based on sterically activated materials, yielding a panchromatic photoinitiator for one‐and two‐photon polymerization. This is embodied by a regioselectively brominated N‐doped polycyclic aromatic hydrocarbon, 5,14‐NMI‐Cz (5,14‐dibromo‐2‐(2,6‐diisopropylphenyl)‐1H‐benzo[lmn]carbazolo[9,1‐bc][2,8]phenanthroline‐1,3(2H)‐dione). Through a combination of steric activation, strong charge‐transfer character, and structural planarization upon excitation, 5,14‐NMI‐Cz enables radical generation via photo‐dehalogenation under visible to NIR light, including 1064 nm lasers, at remarkably low thresholds. The initiator exhibits excellent solubility, a high two‐photon absorption cross‐section (68.8 GM), and compatibility with diverse monomer systems. It performs robustly as a one‐component Type I initiator and as a photosensitizer in two‐ and three‐component Type II systems, achieving efficient photopolymerization across the 405–565 nm spectrum. Applications include high‐resolution 3D printing, microholography, and fluorescent microtagging, all enabled by visible or NIR activation. These findings introduce a new class of multifunctional photoinitiators with exceptional versatility for advanced additive manufacturing and secure optical encoding.

Förderung

  • Narodowa Agencja Wymiany Akademickiej
  • Agencja Badań Medycznych
  • Academic Computer Centre Cyfronet, AGH University of Science and Technology
  • Narodowe Centrum Nauki

Zitieren

APA

Piskorz, K., Starzak, K., Noworyta, M., Cyprych, K., Bartkowski, K., Badri, Z., Dhiman, S., Foroutan‐Nejad, C., Mysliwiec, J., Lindner, M., & Ortyl, J. (2026). Strain‐Activated Photo‐Dehalogenation Unlocks Low‐Energy One and Two‐Photon 3D Microfabrication. Advanced Functional Materials, 36(13). https://doi.org/10.1002/adfm.202516241

Vancouver

Piskorz K, Starzak K, Noworyta M, Cyprych K, Bartkowski K, Badri Z, et al. Strain‐Activated Photo‐Dehalogenation Unlocks Low‐Energy One and Two‐Photon 3D Microfabrication. Advanced Functional Materials. 2026;36(13). doi:10.1002/adfm.202516241

BibTeX
@article{Piskorz2026,
  author = {Piskorz, Kacper and Starzak, Katarzyna and Noworyta, Malgorzata and Cyprych, Konrad and Bartkowski, Krzysztof and Badri, Zahra and Dhiman, Sukhvinder and Foroutan‐Nejad, Cina and Mysliwiec, Jaroslaw and Lindner, Marcin and Ortyl, Joanna},
  title = {Strain‐Activated Photo‐Dehalogenation Unlocks Low‐Energy One and Two‐Photon 3D Microfabrication},
  journal = {Advanced Functional Materials},
  year = {2026},
  volume = {36},
  number = {13},
  doi = {10.1002/adfm.202516241}
}
Kostenlos starten →