EUVIMEDEUVIMED entdecken
Crossref

High Entropy‐Tuning Enables Suppressed Phase Transition of Layered Manganese‐Based Oxides for High‐Mass‐Loading Potassium‐Ion Batteries

Shuoqing Zhao, Yan Huang, Wande Song, Bohan Zhang, YoonJeong Choi, Zhenyu Zhu, Haonan Jiang, Fei Du, Shaojun Guo

Advanced Functional Materials · 2025-12 · 35 (49)

DOI: 10.1002/adfm.202511706 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 24.06.2025. Verfasst von Shuoqing Zhao und 8 weiteren Autor:innen. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 42 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Science Fund for Distinguished Young Scholars, National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Layered manganese‐based oxides are regarded as promising cathode materials for potassium‐ion batteries (PIBs). However, their practical application is hindered by sluggish reaction kinetics and poor cycling stability, primarily due to multiple phase transitions and pronounced Jahn–Teller distortion. Herein, a high‐entropy layered oxide, K 0.45 Mn 0.75 Mg 0.05 Al 0.05 Cr 0.05 Co 0.05 Ti 0.05 O 2 is reported, in which the synergistic effect of multicomponent incorporation effectively addresses these challenges. The Cr 3+ /Cr 6+ redox couple provides additional charge compensation and reduces the dependence on the Mn 3+ /Mn 4+ redox pair, thereby mitigating Jahn–Teller distortion. Moreover, the increased configurational entropy suppresses the formation of the unfavorable P3″ phase and delays the P3′ phase transition during cycling, which enhances K + diffusion kinetics and inhibits microcrack propagation. As a result, the synthesized cathode delivers a high discharge capacity of 124.2 mAh g −1 at 20 mA g −1 and retains 81% of its capacity after 120 cycles in a full‐cell. Notably, a thick electrode with an ultrahigh mass loading of 48.5 mg cm −2 achieves an areal capacity of 4.0 mAh cm −2 , representing a record‐high value among PIB cathodes. This work offers a new pathway for the rational design of high‐performance cathode materials, underscoring their promise for high‐energy‐density PIBs.

Förderung

  • National Natural Science Foundation of China
  • National Science Fund for Distinguished Young Scholars
  • National Key Research and Development Program of China
  • Natural Science Foundation of Beijing Municipality

Zitieren

APA

Zhao, S., Huang, Y., Song, W., Zhang, B., Choi, Y., Zhu, Z., Jiang, H., Du, F., & Guo, S. (2025). High Entropy‐Tuning Enables Suppressed Phase Transition of Layered Manganese‐Based Oxides for High‐Mass‐Loading Potassium‐Ion Batteries. Advanced Functional Materials, 35(49). https://doi.org/10.1002/adfm.202511706

Vancouver

Zhao S, Huang Y, Song W, Zhang B, Choi Y, Zhu Z, et al. High Entropy‐Tuning Enables Suppressed Phase Transition of Layered Manganese‐Based Oxides for High‐Mass‐Loading Potassium‐Ion Batteries. Advanced Functional Materials. 2025;35(49). doi:10.1002/adfm.202511706

BibTeX
@article{Zhao2025,
  author = {Zhao, Shuoqing and Huang, Yan and Song, Wande and Zhang, Bohan and Choi, YoonJeong and Zhu, Zhenyu and Jiang, Haonan and Du, Fei and Guo, Shaojun},
  title = {High Entropy‐Tuning Enables Suppressed Phase Transition of Layered Manganese‐Based Oxides for High‐Mass‐Loading Potassium‐Ion Batteries},
  journal = {Advanced Functional Materials},
  year = {2025},
  volume = {35},
  number = {49},
  doi = {10.1002/adfm.202511706}
}
Kostenlos starten →