EUVIMEDEUVIMED entdecken
Crossref

Fully Thermal‐Evaporated Perovskite Light‐Emitting Diodes with Brightness Exceeding 240 000 Nits

Na Meng, Yajing Li, Xiaorong Shi, Ziqiang Wang, Junhao Liu, Yutian Xu, Yuanhao Cui, Xinwu Ke, Xueli Li, Boya Hu, Xue Min, Kui Xu und 5 weitere

Advanced Functional Materials · 2025-12 · 35 (52)

DOI: 10.1002/adfm.202510484 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, 2025-07. Verfasst von Na Meng und 16 weiteren Autor:innen. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 42 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thermally evaporated perovskite light‐emitting diodes (PeLEDs) have emerged as a promising technology for next‐generation display applications. However, achieving high luminance remains a critical challenge. In this study, a significant enhancement in the luminance of fully vacuum‐evaporated PeLEDs is demonstrated by optimizing both the crystallinity of perovskite films and hole injection efficiency. A lateral 0D/3D Cs 4 PbBr 6 /MA x Cs 1‐x PbBr 3 heterostructure is achieved via co‐evaporation of MABr (MA + = CH 3 NH 3 + ), CsBr, and PbBr 2 . Theoretical calculations indicate that MAPbBr 3 , with its lower formation energy, preferentially forms and serves as a nucleation site for the growth of high‐quality MA x Cs 1‐x PbBr 3 , significantly improving crystallization. Excess CsBr and PbBr 2 react to form Cs 4 PbBr 6 , which passivates defects and confines excitons, thereby enhancing photoluminescence efficiency. The resulting perovskite films exhibit suppressed non‐radiative recombination. Additionally, hole injection and transport efficiency are improved through p‐type doping, ensuring sufficient carrier injection for high‐luminance emission. As a result, the optimized PeLEDs achieve a maximum brightness of 246, 211 cd m − 2 , representing the highest level reported to date for thermally evaporated PeLEDs. These findings underscore the potential of thermally evaporated perovskites for high‐brightness display and lighting applications.

Förderung

  • National Natural Science Foundation of China
  • National Key Research and Development Program of China

Zitieren

APA

Meng, N., Li, Y., Shi, X., Wang, Z., Liu, J., Xu, Y., Cui, Y., Ke, X., Li, X., Hu, B., Min, X., Xu, K., Hu, Z., Chao, L., Xia, Y., Guo, Q., & Chen, Y. (2025). Fully Thermal‐Evaporated Perovskite Light‐Emitting Diodes with Brightness Exceeding 240 000 Nits. Advanced Functional Materials, 35(52). https://doi.org/10.1002/adfm.202510484

Vancouver

Meng N, Li Y, Shi X, Wang Z, Liu J, Xu Y, et al. Fully Thermal‐Evaporated Perovskite Light‐Emitting Diodes with Brightness Exceeding 240 000 Nits. Advanced Functional Materials. 2025;35(52). doi:10.1002/adfm.202510484

BibTeX
@article{Meng2025,
  author = {Meng, Na and Li, Yajing and Shi, Xiaorong and Wang, Ziqiang and Liu, Junhao and Xu, Yutian and Cui, Yuanhao and Ke, Xinwu and Li, Xueli and Hu, Boya and Min, Xue and Xu, Kui and Hu, Zhelu and Chao, Lingfeng and Xia, Yingdong and Guo, Qingxun and Chen, Yonghua},
  title = {Fully Thermal‐Evaporated Perovskite Light‐Emitting Diodes with Brightness Exceeding 240 000 Nits},
  journal = {Advanced Functional Materials},
  year = {2025},
  volume = {35},
  number = {52},
  doi = {10.1002/adfm.202510484}
}
Kostenlos starten →