Fine‐Tunning BaCo 0.4 Fe 0.4 Zr 0.1 Y 0.1 O 3−δ ‐Based Air Electrodes for Reversible Protonic Ceramic Cells via Co‐Engineering A‐site Deficiency and Nickel Content
Advanced Functional Materials · 2025-10 · 35 (44)
DOI: 10.1002/adfm.202507790 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 16.05.2025. Verfasst von Mingzhuang Liang und 12 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
Reversible protonic ceramic cells offer the potential for high‐efficiency bidirectional conversion between chemical energy and electricity. However, their widespread adoption is hindered by the absence of air electrodes exhibiting both high catalytic activity and stability. The BaCo 0.4 Fe 0.4 Zr 0.1 Y 0.1 O 3−δ perovskite, possessing advantageous bifunctional properties, presents a viable option for commercial development. Research indicates that both bulk Ni doping and surface modification with NiO have been shown to further enhance its air electrode performance in reversible protonic ceramic cells (r‐PCCs). However, a systematic optimization of the nickel‐incorporated BCFZY air electrode is still lacking. In this study, we optimize both surface and bulk characteristics of BCFZY‐based electrodes by carefully tuning the A‐site cation deficiency and nickel doping levels in the perovskite precursor. Specifically, a precursor formulated as Ba 0.95 (Co 0.4 Fe 0.4 Zr 0.1 Y 0.1 ) 0.9 Ni 0.1 O 3−δ is synthesized, resulting in a product predominantly composed of a slightly B‐site deficient perovskite phase and surface‐enriched NiO nanoparticles (2.4 wt.%). B‐site deficiency promotes hydration, increasing proton carrier concentration and thus proton conductivity. Simultaneously, surface NiO nanoparticles facilitate surface exchange and oxygen/steam adsorption, improving catalytic activity. As a result, r‐PCCs incorporating this optimized nanocomposite air electrode demonstrate substantial performance obtained in fuel cell and electrolysis operation.
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
Zitieren
APA
Liang, M., Song, Y., Song, Y., Guan, D., Liu, D., Li, W., Alexandrov, I. V., Sidelnikov, A. V., Yang, G., Zhou, W., Ran, R., Xu, M., & Shao, Z. (2025). Fine‐Tunning BaCo 0.4 Fe 0.4 Zr 0.1 Y 0.1 O 3−δ ‐Based Air Electrodes for Reversible Protonic Ceramic Cells via Co‐Engineering A‐site Deficiency and Nickel Content. Advanced Functional Materials, 35(44). https://doi.org/10.1002/adfm.202507790
Vancouver
Liang M, Song Y, Song Y, Guan D, Liu D, Li W, et al. Fine‐Tunning BaCo 0.4 Fe 0.4 Zr 0.1 Y 0.1 O 3−δ ‐Based Air Electrodes for Reversible Protonic Ceramic Cells via Co‐Engineering A‐site Deficiency and Nickel Content. Advanced Functional Materials. 2025;35(44). doi:10.1002/adfm.202507790
BibTeX
@article{Liang2025,
author = {Liang, Mingzhuang and Song, Yixiao and Song, Yufei and Guan, Daqin and Liu, Dongliang and Li, Wenhuai and Alexandrov, Igor V. and Sidelnikov, Artyom V. and Yang, Guangming and Zhou, Wei and Ran, Ran and Xu, Meigui and Shao, Zongping},
title = {Fine‐Tunning BaCo 0.4 Fe 0.4 Zr 0.1 Y 0.1 O 3−δ ‐Based Air Electrodes for Reversible Protonic Ceramic Cells via Co‐Engineering A‐site Deficiency and Nickel Content},
journal = {Advanced Functional Materials},
year = {2025},
volume = {35},
number = {44},
doi = {10.1002/adfm.202507790}
}
EUVIMED