EUVIMEDEUVIMED entdecken
Crossref

Synchronous In‐Situ Self‐Powered Monitoring Method for Speed and Skidding of High‐Speed Bearing Based on Triboelectric Nanogenerator

Ruoshui Liu, Hengyu Li, Pengfei Wang, Jianyang Zhu, Shaohua Zhang, Lu Gao, Zheng Yang, Le Gu, Tinghai Cheng

Advanced Functional Materials · 2025-09 · 35 (39)

DOI: 10.1002/adfm.202505831 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 17.04.2025. Verfasst von Ruoshui Liu und 8 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Speed and skidding rate are crucial parameters for evaluating bearing performance, and their effective monitoring is essential for early fault detection and ensuring reliable equipment operation. Current monitoring methods often face limitations in installation space and insufficient measurement accuracy, making in‐situ monitoring difficult and restricting their practical application. To address these challenges, this study proposes a method for synchronous in‐situ monitoring of bearing speed and skidding. Two triboelectric nanogenerators (TENGs) are integrated within the confined space of the bearing, employing the snap‐fit embedded connection between the cage, inner ring and rotor, thereby enabling precise and reliable monitoring. Utilizing dynamic contact mode, the TENG achieves enhanced durability while maintaining an optimal output performance. Based on this method, a bearing condition monitoring sensor (BCMS) is developed. The BCMS demonstrates exceptional measurement precision across an operational speed range of 600–6000 rpm, achieving a speed monitoring error of less than 0.10% and a skidding error within 0.25%, while still providing effective output after over 8 million cycles. Furthermore, a high‐speed bearing working state monitoring system is developed to enable online monitoring of bearing speed and skidding under various operating conditions. This study provides a new method for the development of self‐powered smart bearings.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Liu, R., Li, H., Wang, P., Zhu, J., Zhang, S., Gao, L., Yang, Z., Gu, L., & Cheng, T. (2025). Synchronous In‐Situ Self‐Powered Monitoring Method for Speed and Skidding of High‐Speed Bearing Based on Triboelectric Nanogenerator. Advanced Functional Materials, 35(39). https://doi.org/10.1002/adfm.202505831

Vancouver

Liu R, Li H, Wang P, Zhu J, Zhang S, Gao L, et al. Synchronous In‐Situ Self‐Powered Monitoring Method for Speed and Skidding of High‐Speed Bearing Based on Triboelectric Nanogenerator. Advanced Functional Materials. 2025;35(39). doi:10.1002/adfm.202505831

BibTeX
@article{Liu2025,
  author = {Liu, Ruoshui and Li, Hengyu and Wang, Pengfei and Zhu, Jianyang and Zhang, Shaohua and Gao, Lu and Yang, Zheng and Gu, Le and Cheng, Tinghai},
  title = {Synchronous In‐Situ Self‐Powered Monitoring Method for Speed and Skidding of High‐Speed Bearing Based on Triboelectric Nanogenerator},
  journal = {Advanced Functional Materials},
  year = {2025},
  volume = {35},
  number = {39},
  doi = {10.1002/adfm.202505831}
}
Kostenlos starten →