Enhancing Thermoelectric Performance and Flexibility of Sb 2 Te 3 Thin Films through MAPbI 3 ‐Induced Crystallographic Orientation Modulations and Interfacial Doping
Advanced Functional Materials · 2025-09 · 35 (38)
DOI: 10.1002/adfm.202505424 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 17.04.2025. Verfasst von Dong Yang und 11 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 51 Literaturangaben. Gefördert von: Innovative Research Group Project of the National Natural Science Foundation of China.
Abstract (Originalsprache)
Wearable thermoelectric (TE) devices have garnered significant attention, but achieving both high TE performance and flexibility in Sb 2 Te 3 ‐based systems remains a challenge. In this study, methylammonium lead iodide (MAPbI 3 ) is incorporated to simultaneously enhance the TE performance and mechanical flexibility of Sb 2 Te 3 thin films. The integration of MAPbI 3 introduces micro strain, modulating the crystal orientation by suppressing the (015) plane and enhancing the (00 l ) plane, leading to improved carrier mobility and electrical conductivity. Additionally, MAPbI 3 ‐induced interfacial doping reduces carrier concentration and increases the Seebeck coefficient. The introduced lattice defects, such as large‐angle grain boundaries, strengthen phonon scattering, significantly reducing thermal conductivity and yielding a high zT of 0.47 at 250 °C. The films demonstrate exceptional flexibility, as evidenced by a decrease in the resistance change ratio ( ΔR / R 0 ) from 54.6% to 8.7% upon MAPbI 3 incorporation, attributed to its lower Young's modulus. The fabricated device achieves a maximum output power of 33.5 nW under a temperature gradient of 10 K, consistent with finite element simulations, highlighting its promising potential for wearable electronics.
Förderung
- Innovative Research Group Project of the National Natural Science Foundation of China
Zitieren
APA
Yang, D., Chen, N., Zhang, Z., Mansoor, A., Li, F., Ma, H., Liang, G., Zhang, X., Halet, J., Chen, Y., Luo, J., & Zheng, Z. (2025). Enhancing Thermoelectric Performance and Flexibility of Sb 2 Te 3 Thin Films through MAPbI 3 ‐Induced Crystallographic Orientation Modulations and Interfacial Doping. Advanced Functional Materials, 35(38). https://doi.org/10.1002/adfm.202505424
Vancouver
Yang D, Chen N, Zhang Z, Mansoor A, Li F, Ma H, et al. Enhancing Thermoelectric Performance and Flexibility of Sb 2 Te 3 Thin Films through MAPbI 3 ‐Induced Crystallographic Orientation Modulations and Interfacial Doping. Advanced Functional Materials. 2025;35(38). doi:10.1002/adfm.202505424
BibTeX
@article{Yang2025,
author = {Yang, Dong and Chen, Ning and Zhang, Zilong and Mansoor, Adil and Li, Fu and Ma, Hongli and Liang, Guangxing and Zhang, Xianghua and Halet, Jean‐François and Chen, Yue‐Xing and Luo, Jingting and Zheng, Zhuang‐Hao},
title = {Enhancing Thermoelectric Performance and Flexibility of Sb 2 Te 3 Thin Films through MAPbI 3 ‐Induced Crystallographic Orientation Modulations and Interfacial Doping},
journal = {Advanced Functional Materials},
year = {2025},
volume = {35},
number = {38},
doi = {10.1002/adfm.202505424}
}
EUVIMED