EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Fluoride‐Free Molten Salt Hydrate‐Assisted Synthesis of MXene in Air Down to 150 °C

Sin‐Yi Pang, Weng Fu Io, Lok‐Wing Wong, Xinyue Lao, Qianqian Bai, Kam Lin Chan, Jiong Zhao, Jianhua Hao

Advanced Functional Materials · 2025-09 · 35 (38)

DOI: 10.1002/adfm.202504864 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 14.04.2025. Verfasst von Sin‐Yi Pang und 7 weiteren Autor:innen. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The conventional Lewis acid molten salt etching approach for synthesizing MXenes typically necessitates elevated temperatures exceeding 550 °C, in addition to the use of inert gas protection to prevent oxidation. Additionally, delamination of molten salt‐etched MXenes typically requires hazardous intercalating agents. Herein, a scalable and non‐toxic low‐temperature shielded salt (LSS) approach for synthesizing MXene in air is reported, with the use of only a small portion of salts and a low reaction temperature down to 150 °C. Especially, the synergistic effect of the increased diffusion rate by Li + ions and the phase change of magnesium chloride hexahydrate (MgCl 2 ·6H 2 O) enables a redox‐controlled A‐site etching of the parent MAX phase, which even facilitates the synthesis of hard‐to‐etch MXenes. As a proof‐of‐concept demonstration, several theoretically hard‐to‐synthesize MXenes including Cr 2 CT x and Nb 2 CT x are successfully prepared through the LSS technique, where Cr 2 CT x is not achieved by Lewis acidic molten salt yet. Compared to conventional techniques, this low‐temperature shielded salt etching method exhibits unconventional molten behavior while offering several advantages, including a non‐oxidizing environment, shorter processing time, and elimination of highly corrosive washing agents and organic intercalants. These advances render the LSS approach a promising route for synthesizing MXenes with applications toward diverse practical applications.

Zitieren

APA

Pang, S., Io, W. F., Wong, L., Lao, X., Bai, Q., Chan, K. L., Zhao, J., & Hao, J. (2025). Fluoride‐Free Molten Salt Hydrate‐Assisted Synthesis of MXene in Air Down to 150 °C. Advanced Functional Materials, 35(38). https://doi.org/10.1002/adfm.202504864

Vancouver

Pang S, Io WF, Wong L, Lao X, Bai Q, Chan KL, et al. Fluoride‐Free Molten Salt Hydrate‐Assisted Synthesis of MXene in Air Down to 150 °C. Advanced Functional Materials. 2025;35(38). doi:10.1002/adfm.202504864

BibTeX
@article{Pang2025,
  author = {Pang, Sin‐Yi and Io, Weng Fu and Wong, Lok‐Wing and Lao, Xinyue and Bai, Qianqian and Chan, Kam Lin and Zhao, Jiong and Hao, Jianhua},
  title = {Fluoride‐Free Molten Salt Hydrate‐Assisted Synthesis of MXene in Air Down to 150 °C},
  journal = {Advanced Functional Materials},
  year = {2025},
  volume = {35},
  number = {38},
  doi = {10.1002/adfm.202504864}
}
Kostenlos starten →