EUVIMEDEUVIMED entdecken
Crossref

Interfacial Bridge Bonding Enables High‐Efficiency Sb 2 (S,Se) 3 Solar Cells with Record Fill Factor Exceeding 73%

Xiaoqi Peng, Zhentao Ma, Zixu He, Rongfeng Tang, Jianyu Li, Shuwei Sheng, Ting Wu, Yue Hu, Zhiyuan Cai, Zequan Jiang, Yuchen Li, Changfei Zhu und 3 weitere

Advanced Functional Materials · 2025-08 · 35 (35)

DOI: 10.1002/adfm.202503314 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 27.03.2025. Verfasst von Xiaoqi Peng und 14 weiteren Autor:innen. Die Arbeit wurde bisher 30-mal zitiert (Crossref) und nennt 38 Literaturangaben. Gefördert von: Fundamental Research Funds for the Central Universities, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

For solar cells, interfacial chemical coordination, carrier transport, and energy alignment play critical roles in carrier transport and determine the final energy conversion efficiency. As an emerging solar technology, high‐efficiency Sb 2 (S,Se) 3 solar cells typically utilize cadmium sulfide (CdS) as the interfacial electron transport layer. However, the poor chemical and electrical contact between F‐doped SnO 2 (FTO) substrate and CdS presents a significant challenge to improving device performance. Here, an ultrathin SnO 2 layer is introduced, fabricated via chemical bath deposition, between FTO and CdS to address the interfacial coordination and transport problem. The non‐invasive depth analysis based on synchrotron radiation X‐ray photoelectron spectroscopy shows that this interfacial engineering approach facilitates the formation of S‐Sn bonding at the FTO/CdS interface, which cannot be achieved on the conventional inert FTO surface. Additionally, the existence of an interfacial SnO 2 layer reduces the sulfur vacancy defect (V S ) in the CdS films, enhancing both electrical conductivity and crystallinity. Therefore, the solar cell demonstrates significantly enhanced carrier separation and transport performance. Ultimately, the Sb 2 (S,Se) 3 solar cells achieve a record fill factor exceeding 73%, with a championefficiency of 10.58%. This study presents an effective interfacial engineering strategy to enhance charge transport properties for high‐performance Sb 2 (S,Se) 3 solar cells.

Förderung

  • Fundamental Research Funds for the Central Universities
  • National Natural Science Foundation of China

Zitieren

APA

Peng, X., Ma, Z., He, Z., Tang, R., Li, J., Sheng, S., Wu, T., Hu, Y., Cai, Z., Jiang, Z., Li, Y., Zhu, C., Cao, R., Zheng, X., & Chen, T. (2025). Interfacial Bridge Bonding Enables High‐Efficiency Sb 2 (S,Se) 3 Solar Cells with Record Fill Factor Exceeding 73%. Advanced Functional Materials, 35(35). https://doi.org/10.1002/adfm.202503314

Vancouver

Peng X, Ma Z, He Z, Tang R, Li J, Sheng S, et al. Interfacial Bridge Bonding Enables High‐Efficiency Sb 2 (S,Se) 3 Solar Cells with Record Fill Factor Exceeding 73%. Advanced Functional Materials. 2025;35(35). doi:10.1002/adfm.202503314

BibTeX
@article{Peng2025,
  author = {Peng, Xiaoqi and Ma, Zhentao and He, Zixu and Tang, Rongfeng and Li, Jianyu and Sheng, Shuwei and Wu, Ting and Hu, Yue and Cai, Zhiyuan and Jiang, Zequan and Li, Yuchen and Zhu, Changfei and Cao, Ruiguo and Zheng, Xusheng and Chen, Tao},
  title = {Interfacial Bridge Bonding Enables High‐Efficiency Sb 2 (S,Se) 3 Solar Cells with Record Fill Factor Exceeding 73%},
  journal = {Advanced Functional Materials},
  year = {2025},
  volume = {35},
  number = {35},
  doi = {10.1002/adfm.202503314}
}
Kostenlos starten →