EUVIMEDEUVIMED entdecken
Crossref

High‐Performance All‐Solid‐State Lithium Metal Batteries: Special Cationic Polymerization Interface Chemistry

Cong Wang, Yang Xiao, Yuchuan Zhu, Keyu Chen, Hanxiao He, Daying Guo, Guoyong Fang, Huile Jin, Xi'an Chen, Shun Wang

Advanced Functional Materials · 2025-10 · 35 (40)

DOI: 10.1002/adfm.202500761 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 21.04.2025. Verfasst von Cong Wang und 9 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 43 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Zhejiang Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyethylene oxide (PEO) based solid polymer electrolytes (SPEs) are severely hindered in their commercialization process due to their room temperature ionic conductivity and unstable electrolyte/electrode interface. Herein, it is reported that a small amount of TiF 4 ionic compound powder is added to the PEO‐based solid electrolyte with Li‐bis(trifluoromethyl)sulfonimide (LiTFSI). The introduction of TiF 4 exhibits special cationic polymerization interface chemistry with LiTFSI and PEO, thus generating more grain boundaries, improving ionic conductivity and Li + migration number, and improving oxidation stability and thermal stability. As a result, an ionic conductivity of 0.22 mS cm −1 is achieved. In the Li‐ LiNi 0.8 Mn 0.1 Co 0.1 O 2 system, when the charging voltage is adjusted to 4.2 V, the battery can still maintain cycling stability at 0.5C. When the mass loading is increased to 15.0 mg cm⁻ 2 , the assembled Li‐LiFeO 4 pouch cell cycles stably for 300 cycles at 0.25C, with a high cycle retention rate of 91.2%. The energy density is 307.3 Wh kg⁻¹. More importantly, solid lithium–sulfur batteries exhibit an initial discharge capacity of 872 mAh g −1 at 0.25C, and after 500 cycles, the decay rate of each cycle is only 0.094%. This work provides a new approach for achieving ultra‐long cycle life for all‐solid‐state lithium metal batteries at room temperature.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Zhejiang Province

Zitieren

APA

Wang, C., Xiao, Y., Zhu, Y., Chen, K., He, H., Guo, D., Fang, G., Jin, H., Chen, X., & Wang, S. (2025). High‐Performance All‐Solid‐State Lithium Metal Batteries: Special Cationic Polymerization Interface Chemistry. Advanced Functional Materials, 35(40). https://doi.org/10.1002/adfm.202500761

Vancouver

Wang C, Xiao Y, Zhu Y, Chen K, He H, Guo D, et al. High‐Performance All‐Solid‐State Lithium Metal Batteries: Special Cationic Polymerization Interface Chemistry. Advanced Functional Materials. 2025;35(40). doi:10.1002/adfm.202500761

BibTeX
@article{Wang2025,
  author = {Wang, Cong and Xiao, Yang and Zhu, Yuchuan and Chen, Keyu and He, Hanxiao and Guo, Daying and Fang, Guoyong and Jin, Huile and Chen, Xi'an and Wang, Shun},
  title = {High‐Performance All‐Solid‐State Lithium Metal Batteries: Special Cationic Polymerization Interface Chemistry},
  journal = {Advanced Functional Materials},
  year = {2025},
  volume = {35},
  number = {40},
  doi = {10.1002/adfm.202500761}
}
Kostenlos starten →